Dell PowerConnect 5448 User's Guide - Page 286
MB Half-Duplex, 10 MB Full-Duplex, 100 MB Full-Duplex and 1000 MB Full-Duplex.
View all Dell PowerConnect 5448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 286 highlights
• LAG Type - The port types that comprise the LAG. • Admin Status - Enables or disables traffic forwarding through the selected LAG. • Current LAG Status - Indicates if the LAG is currently operating. • Re-Activate Suspended LAG - Reactivates a suspended LAG. • Operational Status - Operational status of the LAG. • Admin Auto Negotiation - Enables or disables Auto Negotiation on the LAG. Auto-negotiation is a protocol between two link partners that enables a LAG to advertise its transmission rate, duplex mode and flow control (the flow control default is disabled) abilities to its partner. • Current Auto Negotiation - The currently configured Auto Negotiation setting. • Admin Speed - The speed at which the LAG is operating. • Current LAG Speed - The currently configured speed at which the LAG is operating. • Admin Advertisement - The speed that the LAG advertises. Options include Maximum Capacity, 10 MB Half-Duplex, 10 MB Full-Duplex, 100 MB Full-Duplex and 1000 MB Full-Duplex. • Current Advertisement - The port advertises its speed to its neighbor port to start the negotiation process. The possible field values are those specified in teh Admin Advertisement field. • Neighbor Advertisement - Indicates the neighboring port's advertisement settings. The field values are identical to the Admin Advertisement field values. • Admin Flow Control - Enables/disables flow control, or enables the auto negotiation of flow control on the LAG. • Current Flow Control - The user-designated flow control setting. • PVE (Uplink) - A port can be defined as a Private VLAN Edge (PVE) port of an uplink port, so that it will be isolated from other ports within the same VLAN. Defining LAG Parameters 1 Open the LAG Configuration page. 2 Select a LAG in the LAG field. 3 Define the fields. 4 Click Apply Changes. The LAG parameters are saved to the device. Modifying LAG Parameters 1 Open the LAG Configuration page. 2 Select a LAG in the LAG field. 3 Modify the fields. 4 Click Apply Changes. The LAG parameters are saved to the device. 286 Configuring Device Information