Dell PowerConnect 5448 User's Guide - Page 146
Optical Transceiver Diagnostics, Show All, Virtual Cable Test Results Table, Voltage, Current
View all Dell PowerConnect 5448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 146 highlights
Displaying Optical Transceiver Diagnostics Test Results Table 1 Open the Optical Transceiver Diagnostics page. 2 Click Show All. The test is run and the Virtual Cable Test Results Table opens. The Optical Transceiver Diagnostics Table contains the following columns: • Temp - Internally measured transceiver temperature. • Voltage - Internally measured supply voltage. • Current - Measured TX bias current. • Output Power - Measured TX output power in milliwatts. • Input Power - Measured RX received power in milliwatts. • TX Fault - Transmitter fault. Finisair transceivers do not support the transmitter fault diagnostic testing. • LOS - Loss of signal. • Data Ready - The transceiver has archived power up and data is ready. • N/A - Not Available, N/S - Not Supported, W - Warning, E - Error. Fiber Optic analysis feature works only on SFPs that support the digital diagnostic standard SFF-4872. Performing Fiber Optic Cable Tests Using CLI Commands The following table summarizes the equivalent CLI command for performing fiber optic cable tests. Table 6-29. Fiber Optic Cable Test CLI Commands CLI Command show fiber-ports optical-transceiver [interface][detailed] Description Displays the optical transceiver diagnostics. 146 Configuring System Information