Dell PowerConnect 5448 User's Guide - Page 196

Enabling Authentication Notifications 1 Open the SNMP Global Parameters page. 2 Select Enable in the Authentication Notifications field. 3 Click Apply Changes. Enabling SNMP Notifications Using CLI Commands The following table summarizes the equivalent CLI commands for viewing fields displayed in the SNMP Global Parameters page. Table 6-42. SNMP Notification Commands CLI Command Description snmp-server enable traps Enables the router to send Simple Network Management Protocol traps. snmp-server trap authentication Enables the router to send Simple Network Management Protocol traps when authentication fails. show snmp Checks the status of SNMP communications. snmp-server engine ID Indicates the local device engine ID. The field values is a hexadecimal string. Each local {engineid- byte in hexadecimal character strings is two hexadecimal digits. Each byte can be string | default} separated by a period or colon. The Engine ID must be defined before SNMPv3 is enabled. The following is an example of the CLI commands: Console (config)# snmp-server enable traps Console (config)# snmp-server trap authentication Console# show snmp Community-String Community-Access public read only View name --------view-1 IP address ---------All Community-String Group name IP address ---------- Type ---- Traps are enabled. Authentication-failure trap is enabled. 196 Configuring System Information