Dell PowerConnect 5448 User's Guide - Page 311
Port Fast: No con d: No, Designated bridge Priority : 32768
View all Dell PowerConnect 5448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 311 highlights
Table 7-20. STP Port Settings CLI Commands CLI Command Description spanning-tree disable Disables spanning tree on a specific port. spanning-tree cost cost Configures the spanning tree cost contribution of a port. spanning-tree port-priority priority Configures port priority. spanning-tree portfast Enables PortFast mode. show spanning-tree [ethernet interface | Displays spanning tree configuration. port-channel port-channel-number] spanning-tree guard root Enables root guard on all the spanning tree instances on that interface. The following is an example of the CLI commands: console(config)# interface ethernet g5 console(config-if)# spanning-tree disable console(config-if)# spanning-tree cost 35000 console(config-if)# spanning-tree port-priority 96 console(config-if)# exit console(config)# exit console# show spanning-tree ethernet g5 Port g5 disabled State: disabled Port id: 96.5 Type: P2p (configured: Auto) STP Designated bridge Priority : 32768 Designated port id: 96.5 Role: disabled Port cost: 35000 Port Fast: No (configured: No) Address: 00:e8:00:b4:c0:00 Designated path cost: 19 Number of transitions to forwarding state: 0 BPDU: sent 0, received 0 console# Configuring Device Information 311