Dell PowerConnect 5448 User's Guide - Page 329
show interfaces switchport ethernet, Acceptable Frame Type: admitAll
View all Dell PowerConnect 5448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 329 highlights
The following table summarizes the equivalent CLI commands for configuring QinQ. Table 7-27. QinQ CLI Commands CLI Command Console>enable Console#config Console (config)# Console (config)# vlan database Console (config-vlan)# vlan 100 Console (config-vlan)# exit Console (config)# interface ethernet e5 Console (config-if)# switchport mode customer Console (config-if)# switchport customer vlan 100 Console (config-if)# exit Console (config)# interface ethernet e10 Console (config-if)# switchport mode trunk Console (config-if)# switchport trunk allowed vlan add 100 Console (config-if)# exit The following is an example of the QinQ show commands. Console# show interfaces switchport ethernet 1/e5 Port: 1/e5 Port Mode: Customer Gvrp Status: disabled Ingress Filtering: true Acceptable Frame Type: admitAll Ingress UnTagged VLAN ( NATIVE ): 100 Protected: Disabled Port is member in: Configuring Device Information 329