Dell PowerConnect 5448 User's Guide - Page 88
Supported IP Format, Link Local Interface
View all Dell PowerConnect 5448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
• Delay - The amount of time it takes to reach the SNTP server. • Remove - Removes a specific SNTP server from the SNTP Server list, when selected. When adding an SNTP Server, the following additional parameters are available: • Supported IP Format - Specifies the IP format supported by the SNTP server. The possible values are: - IPv6 - IP version 6 is supported. - IPv4 - IP version 4 is supported. • IPv6 Address Type - When the server supports IPv6 (see previous parameter), this specifies the type of static address supported. The possible values are: - Link Local - A Link Local address that is non-routable and used for communication on the same network only. - Global - A globally unique IPv6 address; visible and reachable from different subnets. • Link Local Interface - When the server supports an IPv6 Link Local address (see previous parameter), this specifies the the Link Local interface. The possible values are: - VLAN1 - The IPv6 interface is configured on VLAN1. - ISATAP - The IPv6 interface is configured on ISATAP tunnel. Adding an SNTP Server 1 Open the SNTP Servers page. 2 Click Add. The Add SNTP Server page opens: Figure 6-12. Add SNTP Server 3 Define the fields. 4 Click Apply Changes. The SNTP Server is added, and the device is updated. 88 Configuring System Information