Dell PowerConnect 5448 User's Guide - Page 417
Egress Shaping Rate on Selected Port, Committed Information Rate CIR
View all Dell PowerConnect 5448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 417 highlights
Figure 9-4. Bandwidth Settings • Interface - Indicates the port or LAG that is being displayed. • Egress Shaping Rate on Selected Port - Indicates the Egress traffic limit status for the interface. - Checked - The Egress traffic limit is enabled. - Not Checked - The Egress traffic limit is disabled. • Committed Information Rate (CIR) - Defines the Egress CIR traffic limit for the interface. • Committed Burst Size (CBS) - Defines the Egress CBS traffic limit for the interface. • Ingress Rate Limit Status - Indicates the Ingress traffic limit status for the interface. - Checked - The Ingress traffic limit is enabled. - Not Checked - The Ingress traffic limit is disabled. • Ingress Rate Limit - Defines the Ingress traffic limit for the interface. Assigning bandwidth settings for an interface: 1 Open the Bandwidth Settings page. 2 Select an interface in the Interface field. 3 Define the fields. 4 Click Apply Changes. The bandwidth settings are assigned to the interface. Configuring Quality of Service 417