Dell PowerConnect 5448 User's Guide - Page 56
boot system, The following is an example of the information that appears on the screen.
View all Dell PowerConnect 5448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
5 Enter copy tftp://{tftp address}/{file name} image to copy a new system image to the device. When the new image is downloaded, it is saved in the area allocated for the other copy of system image (image-2, as given in the example). The following is an example of the information that appears: console# copy tftp://176.215.31.3/file1.ros image Accessing file 'file1' on 176.215.31.3Ö Loading file1 from 176.215.31.3: Copy took 00:01:11 [hh:mm:ss] Exclamation symbols indicate that a copying process is in progress. Each symbol (!) corresponds to 512 bytes transferred successfully. A period indicates that the copying process is timed out. Many periods in a row indicate that the copying process failed. 6 Select the image for the next boot by entering the boot system command. After this, enter show bootvar to verify that the copy indicated as a parameter in the boot system command is selected for the next boot. The following is an example of the information that appears on the screen. console# boot system image-2 console# sh boot Images currently available on the Flash Image-1 active Image-2 not active (selected for next boot) If the image for the next boot is not selected by entering the boot system command, the system boots from the currently active image. 7 Enter the reload command. The following message is displayed: console# reload This command will reset the whole system and disconnect your current session. Do you want to continue (y/n) [n]? 8 Enter y. The device reboots. 56 Starting and Configuring the Device