Dell PowerConnect 5448 User's Guide - Page 114
ip address dhcp, DHCP IPv4 Interface, Apply Changes, Show All, Remove
View all Dell PowerConnect 5448 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Modifying a DHCP IPv4 Interface 1 Open the DHCP IPv4 Interface page. 2 Modify the fields. 3 Click Apply Changes. The entry is modified, and the device is updated. Deleting a DHCP IPv4 Interface 1 Open the DHCP IPv4 Interface page. 2 Click Show All. The DHCP IPv4 Interface Table opens. 3 Select a DHCP client entry. 4 Select the Remove check box. 5 Click Apply Changes. The selected entry is deleted, and the device is updated. Defining DHCP IPv4 Interfaces Using CLI Commands The following table summarizes the equivalent CLI commands for defining DHCP clients. Table 6-18. DHCP IPv4 Interface CLI Commands CLI Command Description ip address dhcp To acquire an IP address on an Ethernet interface from the [hostname host-name] Dynamic Host Configuration Protocol (DHCP). The following is an example of the CLI command: console> enable console# config console (config#) interface ethernet g1 console (config-if)# ip address dhcp 10.0.0.1 /8 114 Configuring System Information