Dell PowerEdge R415 Hardware Owner's Manual - Page 110
Installing the System Board Shroud, See
View all Dell PowerEdge R415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 110 highlights
Figure 3-16. Removing and Installing the System Board Shroud 1 2 1 system board shroud 2 shroud tab (2) Installing the System Board Shroud 1 Open the system. See "Opening the System" on page 82. 2 Align the shroud using center of the numbered fan bays as a guide and locate the tab projection on the left side of the fan module numbered 3. See Figure 3-16. 3 Push the system board shroud down until all edges are seated in the slots, securing the shroud to the system board. 4 Route the cables appropriately through the cable holders on the system board shroud. 5 Close the system. See "Closing the System" on page 83. 110 Installing System Components
110
Installing System Components
Figure 3-16.
Removing and Installing the System Board Shroud
Installing the System Board Shroud
1
Open the system. See "Opening the System" on page 82.
2
Align the shroud using center of the numbered fan bays as a guide and
locate the tab projection on the left side of the fan module numbered 3.
See Figure 3-16.
3
Push the system board shroud down until all edges are seated in the slots,
securing the shroud to the system board.
4
Route the cables appropriately through the cable holders on the system
board shroud.
5
Close the system. See "Closing the System" on page 83.
1
system board shroud
2
shroud tab (2)
1
2