Dell PowerEdge R415 Hardware Owner's Manual - Page 64
Integrated Devices Screen, Boot Mode, Disabled, Enabled, All Ports On, Only Back Ports
View all Dell PowerEdge R415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
Option Hard-Disk Drive Sequence USB Flash Drive Emulation Type (Auto default) Boot Sequence Retry (Disabled default) Description Determines the order in which the BIOS will attempt to boot from hard-drives in the system during system startup. Determines the emulation type for a USB flash drive. If Boot Mode is set to UEFI, this field is disabled. If this field is enabled and the system has failed to boot, the system reattempts to boot after 30 seconds. Integrated Devices Screen Option Description Integrated SAS Controller (Enabled default) Enables or disables the integrated SAS controller. User Accessible USB Ports (All Ports On default) Enables or disables the user-accessible USB ports. Options are All Ports On, Only Back Ports On, and All Ports Off. Internal USB Port 1 (On default) Enables or disables the internal USB port. Internal USB Port 2 (On default) Enables or disables the internal USB port. Embedded NIC1 and Enables or disables the operating system interface of the NIC2 (Enabled default) embedded NICs. The NICs may also be accessed through the system's management controller. Embedded Gb NICx (Enabled default) Enables or disables the integrated NIC. Options are Enabled and Enabled with PXE. PXE support allows the system to boot from the network. MAC Address Displays the MAC address for the integrated 10/100/1000 NIC. 64 Using the System Setup Program and UEFI Boot Manager