Dell PowerEdge R415 Hardware Owner's Manual - Page 139
Installing the Control Panel Assembly, panel, skip step 4.
View all Dell PowerEdge R415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
Installing the Control Panel Assembly CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions that came with the product. 1 For LED control panel, proceed to step 3. Insert the display module into the chassis cutout and secure with the two screws. 2 Affix the replacement panel to the front of the display module. 3 Align the slot in the control panel board with the standoff on the system chassis and secure with the two screws. See Figure 3-29. For LED control panel, skip step 4. 4 Connect the display module cable to the control panel board. 5 Connect the control panel cable to the control panel board. 6 Close the system. See "Closing the System" on page 83. 7 If applicable, replace the front bezel. See "Installing the Front Bezel" on page 81. Installing System Components 139