Dell PowerEdge R415 Hardware Owner's Manual - Page 22
Table 1-1., Diagnostic Indicator Codes Optional, Causes, Corrective Action - bios
View all Dell PowerEdge R415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Table 1-1. Diagnostic Indicator Codes (Optional) Code Causes Corrective Action The system is in a normal Plug the system into a working off condition or a possible electrical outlet and press the pre-BIOS failure has power button. occurred. The diagnostic lights are not lit after the system successfully boots to the operating system. The system is in a normal Information only. operating condition after POST. BIOS checksum failure detected; system is in recovery mode. See "Getting Help" on page 181. Possible processor failure. See "Troubleshooting the Processors" on page 166. Memory failure. See "Troubleshooting System Memory" on page 157. Possible expansion card See "Troubleshooting Expansion failure. Cards" on page 165. Possible video failure. See "Getting Help" on page 181. Hard drive failure. Possible USB failure. Ensure that the diskette drive and hard-drive are properly connected. See "Hard Drives" on page 84 for information on the drives installed in your system. See "Troubleshooting a USB Device" on page 150. 22 About Your System