Dell PowerEdge R415 Hardware Owner's Manual - Page 26
E122E On-board, CPU # VCORE
View all Dell PowerEdge R415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Table 1-2. LCD Status Messages (Optional) (continued) Code E122E E1243 E1310 E1311 E1313 E1314 Text Causes Corrective Actions On-board regulator failed. Call support. One of the on-board voltage regulators failed. Remove AC power to the system for 10 seconds and restart the system. If the problem persists, see "Getting Help" on page 181. CPU # VCORE Regulator failure. Contact Support. Processor voltage regulator Reseat the processor. See failed. "Troubleshooting the Processors" on page 166. If the problem persists, see "Getting Help" on page 181. Fan ## RPM exceeding range. Check fan. RPM of specified fan is outside of the intended operating range. See "Troubleshooting System Cooling Problems" on page 156. RPM Fan ##x RPM of fan x in the # module is out of acceptable operating range. See "Troubleshooting System Cooling Problems" on page 156. Fan redundancy The system is no longer lost. Check fan redundant. Another fans. fan failure would put the system at risk of over-heating. Check LCD for additional scrolling messages. See "Troubleshooting a Fan" on page 156. Critical All fans have been Ensure that the fans are system cooling removed from the system. properly installed. See loss.Check "Troubleshooting a Fan" fans. on page 156. 26 About Your System