Dell PowerEdge R415 Hardware Owner's Manual - Page 136
blade across the bottom to lift the panel outward. See
View all Dell PowerEdge R415 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
6 Gently work the connector out of the socket. 7 For LCD control panel, disconnect the display module cable from the control panel board. See Figure 3-29. 8 Remove the two screws that secure the control panel board to the system chassis and remove the board. This completes the removal for LED control panel. 9 To remove the display module, use a knife or a small flat-blade screwdriver, and insert the blade beneath the front panel of the display and slide the blade across the bottom to lift the panel outward. See Figure 3-29. 10 Bend the panel upward to allow access to the mounting screws. 11 Remove the two screws that secure the display module to the system chassis. 12 Remove the display module from the chassis cutout. 136 Installing System Components