Denon AVR-5805MK2 Owners Manual - Page 121

NOTES: • The remote control signals of the buttons pressed while registering the system call signals are emitted, so be careful not to operate the components accidentally (cover the remote sensors, for example). • If you exceed the number of signals that can be registered, there will be a changeover to the System Call registration screen. (3) Using the system call function 1 Press the button at which the system call signals have been stored. • The stored signals are transmitted successively. Punch Through (1) Punch through button Buttons used in the CD, CDR, DVD, DVDR,VDP, VCR1 and VCR2 modes can be assigned to the buttons which are not normally 1 used in the AMP, ZONE2, ZONE3, ZONE4, TV and DBS modes. For example, when the CD mode is set to the punch through mode in the AMP mode, the CD mode's PLAY, STOP, MANUAL SEARCH, AUTO SEARCH and PAUSE buttons' signals are sent in the AMP mode. 3, 4 (2) Making the punch through setting 1 Press the power ON button and the OFF button at the same time. 2 2 Press the "4" button to select punch through setting. 3, 4 (1) 3 Press the mode button for the component you want to make the punch through setting, then press the ENTER button. CH SEL ENTER RC-995 4 Press the mode button for the component you want to punch through, then press the ENTER button. • The punch through is set and the set returns to the normal operating mode. CH SEL ENTER 121