Denon AVR-5805MK2 Owners Manual - Page 95

6-7. Zone3 and Zone4 tone control and channel level setting • Adjust the sound output from Zone3 and Zone4. 1 Select "Zone3/4 Tone/Ch Lev." at the Zone Setup Menu. CH SEL ENTER (Main unit) (Remote control unit) *Zone Setup Zone3/4 2 Display the Zone3/4 Tone/Ch Lev. screen. CH SEL ENTER (Main unit) (Remote control unit) *Zone3/4 Z3 Tone/Ch Lev. 3 (Main unit) CH SEL ENTER Select the Zone whose sound you want to adjust. (Zone3, Zone4) Switch to the setting screen. (Main unit) CH SEL ENTER *Z3 Tone/Ch Lev Bass : 0dB Example: When "Zone3" is selected (Remote control unit) (Remote control unit) 4 q Select the item to be set. CH SEL ENTER w Adjust the parameter. CH SEL ENTER (Main unit) (Remote control unit) (Main unit) (Remote control unit) Bass : Adjust the tone for the bass. Treble : Adjust the tone for the treble. (The bass or treble sound can be adjusted between -12 dB and +12 dB in steps of 2.0 dB.) HPF : Set this to "ON" if your speakers do not have a very strong capacity for producing low bass. Using the high pass filter makes it possible to reduce distortion of the bass sound. Channel Level : Set so that the playback level is the same for the left and right channels. (The volume can adjusted between -12 dB and +12 dB in steps of 1.0 dB.) 5 Press the ENTER button to return to the Zone3/4 Tone/Ch Lev. screen. CH SEL ENTER Use the same procedure to make the settings for Zone4. (Main unit) (Remote control unit) 95