Denon AVR-5805MK2 Owners Manual - Page 74

5 Enter the setting. CH SEL The Video Setup Menu reappears. ENTER (Main unit) (Remote control unit) NOTES: • When the component video input signal is a resolution other than 480i/576i, this setting is invalid and the input video is output without change. • The setting of the aspect ratio is valid when the resolution has been set to 1080i or 720p. When the video is output at another resolution, please set the aspect ratio at the TV side. • When the composite input signal or S-video input signal is in PAL format or when the component input signal is in 576i format, the video signal is output with a resolution of 576p, even if the resolution is set at 1080i or 720p. 4-4. Setting the 3D Y/C Separation • This setting sets the action detection sensitivity of the 3-dimensional Y/C separation at the time of the video signal up-conversion to S-Video. 1 Select "3D Y/C Separation" at the Video Setup Menu. CH SEL ENTER (Main unit) (Remote control unit) *Video Setup 3D Y/C Sep. 2 Display the 3D Y/C Separation screen. CH SEL ENTER (Main unit) (Remote control unit) *3D Y/C Sep. MotionDet: MID 3 Select the setting. HIGH : This sets the action detection sensitivity to a high level. It suits video with fast action. CH SEL MID : This is the standard setting. Usually, this setting is recommended. ENTER LOW : This sets the action detection sensitivity to a low level. It suits video with little action, such as still images, etc. (Main unit) (Remote control unit) 4 Enter the setting. CH SEL The Video Setup Menu reappears. ENTER (Main unit) (Remote control unit) 74