Denon AVR-5805MK2 Owners Manual - Page 87
Setting the low frequency distribution for Zone2
UPC - 081757507400
View all Denon AVR-5805MK2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 87 highlights
6-2. Setting the low frequency distribution for Zone2 • Set the subwoofer mode according to the speaker systems used in Zone2. 1 Select "Subwoofer Mode" at the Zone Setup Menu. CH SEL ENTER *Zone Setup Z2 SW Mode (Main unit) (Remote control unit) 2 Display the Subwoofer Mode screen. CH SEL ENTER (Main unit) (Remote control unit) *Z2 SW Mode LFE Zone-2 3 Select the setting. LFE : CH SEL ENTER For any channel(s) that are set to LARGE, low frequencies in that channel's corresponding source are directed to that loudspeaker only. Low frequencies that are directed to the subwoofer(s) are from the program source LFE channel, and from other channels where the (Main unit) (Remote control unit) speakers are set to SMALL. LFE + Main : Low frequencies from speaker channels that have been set to LARGE are reproduced from those speakers as well as from the subwoofer(s). Depending upon the characteristics of the LARGE main speakers, this mode may provide a more even low frequency response throughout the listening room. 4 Enter the setting. CH SEL The Zone Setup Menu reappears. ENTER (Main unit) (Remote control unit) NOTE: • The subwoofer mode setting is only valid when "Large" is set for the Zone2 front speakers and "Yes" is set for the subwoofer in the "6-1. Speaker Configuration" settings. (See page 86) 87