Denon AVR-5805MK2 Owners Manual - Page 161

Fader function • This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) of Zone2 together. Use it for example to adjust the balance of the sound from each position when multi-channel music sources are played. 1 Select the ZONE2 mode using the AMP/Z2 button. (Remote control unit) 1 2 CH SEL The Channel Volume screen is displayed at Zone2 monitor out. ENTER (Remote control unit) 3 Select "FADER". • When pressing the ENTER button, the channel CH SEL ENTER switches in oder shown below each time the ENTER button is pressed. or CH SEL ENTER (Remote control unit) FL C FR SW SR FADER SL SBL SBR 3,4 2,3 RC-995 Zone2 surround back speakers are only displayed when "7.1ch" is selected for the Zone2 channel output setting at "7-1. Channel Setup". When the Zone2 surround back speaker setting is set to "1spkr" for "6-1. Speaker Configuration", this is set to "SB". 4 Press the Cursor left button to reduce the volume of the front channels, the Cursor right button to reduce the volume of the rear channels. CH SEL ENTER The fader function does not affect the SW channel. • The channel whose channel level is adjusted lowest can be faded to -12 dB using the fader function. (Remote control unit) • If the channel levels are adjusted separately after adjusting the fader, the fader adjustment values are cleared, so adjust the fader again. 161