Denon AVR-5805MK2 Owners Manual - Page 28

5. Advanced Playback Advanced Playback 1 2ch Direct/Stereo The speaker settings can be changed specifically for playing in the 2channel direct or stereo mode. 2 Dolby Digital Setup Turn the audio compression on or off when down-mixing Dolby Digital signals. 3 Auto Surround Mode Set the Auto surround mode function. 4 Manual EQ Setup This parameter is for optimizing the Room EQ with which the audio signals are produced from the speakers. Default settings Basic OFF Auto Surround Mode = ON All Channels and Frequency=0dB Page 79 80 81 82~84 6. Zone Setup Zone Setup The components of the signals output from the various speakers and 1 Speaker Configuration the frequency response can be set automatically inside the set by inputting the existence/absence of combinations of speakers and their size (corresponding to their low frequency playback capability) for the speakers used in Zone2 during surround playback in Zone2. 2 Subwoofer Mode This selects the subwoofer used in Zone2 for playing the low base sound. 3 Delay Time This parameter is for optimizing the timing of the sound produced from the various speakers and subwoofer according to the listening position in Zone2. 4 Channel Level This adjusts the volume of the signal output from the various speakers and subwoofer used in Zone2. 5 Crossover Frequency Set the frequency (in Hz) below which deep bass appearing in the main channels will be routed to the Zone2 subwoofer. 6 Video Setup Video Convert Mode Audio Delay Set the input signal to be output from the Zone2 monitor out terminal. Set the delay time the sound is synchronized with the picture which are outputted in Zone2. 7 Zone3/4 Tone/Ch.Lev. Adjust the tone and channel level of the sound output from Zone3 and Zone4. Zone3 Zone4 Front Sp. Default settings Center Sp. Subwoofer Surround Sp. Small Small Yes Small LFE Front L & R Center 12 ft (3.6 m) 12 ft (3.6 m) Front L Front R Center 0.0 dB 0.0 dB 0.0 dB Subwoofer Surround L & R 12 ft (3.6 m) 10 ft (3.0 m) Surround L Surround R Subwoofer 0.0 dB 0.0 dB 0.0 dB 80 Hz AUTO 0 ms Bass = 0 dB, Treble = 0 dB, HPF = OFF, L/R = 0 dB Bass = 0 dB, Treble = 0 dB, HPF = OFF, L/R = 0 dB Page 86 87 88, 89 90, 91 92 93, 94 94 95, 96 7. Option Setup Option Setup Default settings Page 1 Channel Setup The number of channels that you wish to play back in each zone are assigned to each zone accordingly. Main Zone 9.1 CH Zone2 5.1 CH Zone3 Stereo Zone4 Stereo 97~100 Normal 2 Power Amp Assign Power Amplifiers can be assigned to the various channels according to your system's requirements. L1 L2 L3 L4 L5 R1 R2 R3 R4 R5 101~105 FL C SLA SLB SBL FR - SRA SRB SBR 3 Volume Control This sets the volume level of each zone output. Volume Limit: This sets the upper limit for the master volume. Power On Level: This sets the volume level upon switching on the power of each zone. Mute Level: This sets the amount of attenuation of the audio output when each zone is muted. Volume Level: This sets whether the output level of Zone2 to 4 is fixed or variable. MAIN ZONE2 ZONE3 ZONE4 Vol.Limit = OFF, P. On Lev. = LAST, Mute Lev. = FULL Vol.Lev. = VAR, Vol.Limit = OFF, P. On Lev. = LAST, Mute Lev. = FULL Vol.Lev. = VAR, Vol.Limit = OFF, P. On Lev. = LAST, Mute Lev. = FULL Vol.Lev. = VAR, Vol.Limit = OFF, P. On Lev. = LAST, Mute Lev. = FULL 106, 107 ZONE = MAIN, All Surround Modes = ON Trigger Out 1 TUNER PHONO CD CDR/ TAPE DVD VDP TV DBS VCR-1 VCR-2 VCR-3 VCR-4 V.AUX OFF OFF OFF OFF ON ON ON ON ON ON ON ON ON ZONE = 2 4 Trigger Out Setup This sets the Trigger Out output for the different input sources. If "Zone=Main" is selected, settings can be made for the individual surround modes. Trigger Out 2 Trigger Out 3 TUNER PHONO CD CDR/ TAPE DVD VDP TV DBS VCR-1 VCR-2 VCR-3 VCR-4 V.AUX ON ON ON ON ON ON ON ON ON ON ON ON ON 107, 108 ZONE = 3 TUNER PHONO CD CDR/ TAPE DVD VDP TV DBS VCR-1 VCR-2 VCR-3 VCR-4 V.AUX ON ON ON ON ON ON ON ON ON ON ON ON ON ZONE = 4 Trigger Out 4 TUNER PHONO CD CDR/ TAPE DVD VDP TV DBS VCR-1 VCR-2 VCR-3 VCR-4 V.AUX ON ON ON ON ON ON ON ON ON ON ON ON ON ZONE = MAIN 5 AC Outlet Assign This sets the AC outlets to on or off for the different input sources. AC Outlet 1~3 TUNER PHONO CD CDR/ TAPE DVD VDP TV DBS VCR-1 VCR-2 VCR-3 VCR-4 V.AUX 109, 110 ON ON ON ON ON ON ON ON ON ON ON ON ON User 6 Setup Memory/Lock Memory Setup Lock This stores the current user settings in the memory. This sets whether or not to lock the system setup settings so that thay cannot be changed. - Setup Lock = OFF 110, 111 111, 112 28