Denon AVR-5805MK2 Owners Manual - Page 135

3 Ajust the level of the selected speaker. • The adjustment range for the different channels is +12 dB to -12 dB in step of 0.5 dB. CH SEL ENTER • The sound from the subwoofer can be completely cut by lowering the SW (subwoofer) setting one additional from -12 dB (setting it to "OFF"). (Main unit) (Remote control unit) When the surround back speaker setting is set to "1spkr" for "2-1. Speaker Configuration" (pages 46, 47), this is set to "SB". Fader function • This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL, SR, SBL and SBR) together. Use it for example to adjust the balance of the sound from each position when multi-channel music sources are played. 1 Press the ENTER button then select "Fader". • When pressing the ENTER button, the channel switches in the order shown below each time the ENTER button is pressed. FL C FR SW SRA SRB FADER SLA SLB SBL SBR (Main unit) CH SEL ENTER (Main unit) CH SEL ENTER or (Main unit) or CH SEL ENTER 1 1,2 (Remote control unit) (Remote control unit) (Remote control unit) When the surround back speaker setting is set to "1spkr" for "2-1. Speaker Configuration" (pages 46, 47), this is set to "SB". 2 Press the Cursor left button to reduce the volume of the front channels, the Cursor right button to reduce the volume of the rear channels. The fader function does not affect the subwoofer channel. (Main unit) CH SEL ENTER Example: When "FRONT" is selected (Remote control unit) The channel whose channel level is adjusted lowest can be faded to -12 dB using the fader function. If the channel levels are adjusted separately after adjusting the fader, the fader adjustment values are cleared, so adjust the fader again. 1,2 1 RC-995 135