Denon AVR-5805MK2 Owners Manual - Page 27

2. Speaker Setup Speaker Setup Default settings Input the combination of speakers in your system and their 1 Speaker Configuration corresponding sizes (SMALL for regular speakers, LARGE for fullsize, full-range) to automatically set the composition of the signals output from the speakers and the frequency response. Front Sp. Small Center Sp. Small Subwoofer Yes Surround Sp. A / B Small Surround Back Sp. Small / 2spkrs 2 Subwoofer Setup This selects the subwoofer for playing deep bass signals. LFE -THX- 3 Delay Time This parameter is for optimizing the timing with which the audio Front L & R signals are produced from the speakers and subwoofer according to Center Subwoofer Surround L & R (A) Surround L & R (B) Surround Back the listening position. 12 ft (3.6 m) 12 ft (3.6 m) 12 ft (3.6 m) 10 ft (3.0 m) 10 ft (3.0 m) 10 ft (3.0 m) 4 Channel Level This adjusts the volume of the signals output from the speakers and subwoofer for the different channels in order to obtain optimum Front L Front R Center Surround L (A) Surround R (A) Surround Surround L (B) R (B) Surround Back L Surround Back R Subwoofer effects. 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 5 Crossover Frequency Set the frequency (Hz) below which the bass sound of the various speakers is to be output from the subwoofer. FIXED -THX- 6 Surround Speaker Setup Use this function when using multiple surround speaker combinations for more ideal surround sound. Once the combinations of surround speakers to be used for the different surround modes are preset, the surround Surround mode THX/DOLBY/ THX/DOLBY/ DTS DTS CINEMA MUSIC THX/DOLBY GAME speakers are selected automatically according to the Surround surround mode. speaker A A A WIDE SCREEN A+B 9 CH STEREO A+B DSP SIMULATION A+B MULTI CH MODE A 7 THX Audio Setup Boundary Gain compensation Surround Back Speaker Position When using a THX Ultra2 compatible subwoofer, set the subwoofer's frequency response. When using two surround back speakers, set the distance of the two speakers. THX Ultra2 Subwoofer = NO The Distance Between SBL/SBR = 0 ft to 1 ft (0 m to 0.3 m) Page 46, 47 48 49, 50 51, 52 53, 54 55 56 57 3. Audio Input Setup Audio Input Setup Default settings 1 Digital In Assign This assigns the digital input jacks for the different input sources. Input source Digital Inputs CD DVD VDP TV DBS VCR-1 VCR-2 VCR-3 VCR-4 CDR/TAPE V.AUX COAX 1 COAX 2 COAX 3 COAX 4 COAX 5 OPT 1 OPT 2 OPT 3 OPT 4 OPT 5 OPT 6 2 EXT.IN Setup Set the Ext.In terminal playback method. EXT.IN-1 Setup EXT.IN-2 Setup Mode = DSP, Surr.B = NOT USED, S.Back = NOT USED, SW Level = +15 dB, Input ATT. = OFF Mode = DSP, SW Level = +15 dB, Input ATT. = OFF 3 Input Function The playback level is corrected individually for the different input TUNER PHONO CD Lev. sources. CDR/ TAPE DVD VDP TV DBS VCR-1 VCR-2 VCR-3 VCR-4 V.AUX 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 0 dB 4 Function Rename The names of the different input source can be changed as desired and displayed on the display. TUNER PHONO CD CDR/ TAPE DVD VDP TV DBS VCR-1 VCR-2 VCR-3 VCR-4 V.AUX 5 IEEE1394 Assign The connected IEEE1394 device can be automatically identified to assign the input source. - 6 IEEE1394 Auto Func. Set the function for associating playback of the connected IEEE1394 device on or off. Auto Function = OFF A1 ~ A8 87.5/89.1/98.1/107.9/90.1/90.1/90.1/90.1 MHz B1 ~B8 520/600/1000/1400/1500/1710 kHz, 90.1/90.1 MHz Auto Preset Memory 7 Tuner Presets FM stations are received automatically and stored in the memory. C1 ~C8 D1 ~D8 E1 ~E8 F1 ~F8 90.1 MHz 90.1 MHz 90.1 MHz 90.1 MHz G1 ~G8 90.1 MHz Preset Skip Preset channels that are not used often can be skipped. All preset channels = OFF Preset Name The preset channels can be given the names you want. - Page 58, 59 60, 61 62 63, 64 65 66 67 68 69, 70 4. Video Setup Video Setup Default settings 1 Component In This assigns the color difference (component) video input jacks for Assign the different input sources. DVD 1-RCA VDP 2-RCA TV 3-RCA DBS 4-RCA VCR-1 5-RCA VCR-2 6-BNC VCR-3 NONE VCR-4 NONE V.AUX NONE 2 Video Convert Mode Set the input signal to be output from the monitor output terminal. AUTO 3 Video Scaler Make the settings related to video output (resolution and aspect rate conversion). Aspect = FULL, Resolution = 480i / 576i 4 3D Y/C Separation This setting sets the action detection sensitivity of the 3-dimensional Y/C separation at the time of the video signal up-conversion to SVideo. Motion Detection = MID 5 HDMI/DVI In Assign The HDMI or DVI input terminals are assigned for the different input sources. Select HDMI or DVI for the monitor output terminal. Select the HDMI audio signal playback method. DVD NONE VDP NONE TV NONE DBS NONE VCR-1 NONE VCR-2 NONE VCR-3 NONE VCR-4 NONE V.AUX NONE 6 Audio Delay Set the audio delay timing to synchronize the sound and video. 0 ms 7 On Screen Display This sets whether or not to display the on-screen display that appears on the monitor screen when the controls on the remote control unit or main unit are operated. Function/Mode = ON, Master Volume = ON, Mode = Mode 1 Page 71, 72 72, 73 73, 74 74 75, 76 76, 77 77, 78 27