Denon AVR-5805MK2 Owners Manual - Page 86

6-1. Setting the type of speakers for Zone2 • The composition of the signals output to each channels and the frequency response are adjusted automatically according to the combination of speakers actually being used in Zone2. 1 Select "Speaker Config." at the Zone Setup Menu. CH SEL ENTER *Zone Setup Z2 Sp Config. (Main unit) (Remote control unit) 2 Display the Speaker Config. screen as below. CH SEL ENTER (Main unit) (Remote control unit) 3 Set whether speakers are connected or not in Zone2 and their size parameters. Select the speakers connected in Zone2 and the size parameters. CH SEL ENTER q Select the speaker. (Main unit) (Remote control unit) Zone-2 Large Small Small None Yes No Zone-2 Small None *Z2 Sp Config. Front : Small Zone2 Center Sp. w Select the parameter. Zone2 Front Sp. Zone2 Subwoofer CH SEL ENTER For a description of the different parameters, Zone2 Surround Sp. see page 47. * (Zone2 Surround back Sp.) (Main unit) (Remote control unit) 4 Enter the setting. CH SEL The Zone Setup Menu reappears. ENTER * This is only displayed when "7.1ch" is selected for the Zone2 channel output setting at "7-1. Channel Setup". (See pages 97~100) (Main unit) (Remote control unit) 86