Denon AVR-5805MK2 Owners Manual - Page 26
System Setup
UPC - 081757507400
View all Denon AVR-5805MK2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
7 SYSTEM SETUP • Once all connections with other AV components have been completed as described in "CONNECTIONS" (see pages 9~21), make the various settings described below on the monitor screen using the AVR-5805's on-screen display function. These settings are required to set up the listening room's AV system centered around the AVR-5805. 2 Use the following buttons to set up the system 1 Check that the remote control unit set to AMP mode. 2 CURSOR buttons Use these to move the cursors the left, right, up and down on the screen. ENTER button Press this to switch the display. Also use this button to complete the setting. SYSTEM SETUP button Press this to display the system setup menu. NOTES: • The AVR-5805's on-screen display function is designed for use with high resolution monitor TVs, so it may be difficult to read small characters on TVs with small screens or low resolutions. • The setup menu is not displayed when headphones are being used. 2 System setup items and default values (set upon shipment from the factory) 1. Auto Setup/Room EQ 1 Auto Setup 2 Room EQ Setup 3 Direct Mode Setup 4 Mic Input Select Auto Setup / Room EQ This unit performs an analysis of the speaker system and measures the acoustic characteristics of your room to permit an appropriate automatic setting. Set the Room EQ setting with All or Assign for each surround mode. Set the ON/OFF setting of Room EQ, in the case of the surround mode is in Direct or Pure Direct. Set this to switch the Mic Input jack for use for Mic or V.AUX Lchannel input jack. Default settings - All, Room EQ = OFF OFF Mic Page 33~39 40, 41 41 42, 43 26