Denon AVR-5805MK2 Owners Manual - Page 160

[2] Channel Level • After adjusting using the test tones, adjust the channel levels either according to the playback sources or to suit your tastes, as described below. 1 Select the ZONE2 mode using the AMP/Z2 button. (Remote control unit) 2 CH SEL The channel Volume is displayed at Zone2 monitor out. 1 ENTER (Remote control unit) 3 Select the speaker level you want to adjust. • When pressing the ENTER button, the channel CH SEL ENTER switches as shown below each time the ENTER button is pressed. or CH SEL ENTER FL C FR SW SR FADER SL SBL SBR 3,4 2,3 (Remote control unit) 4 Adjust the level of the selected speaker. • The adjustment range for the different channels is CH SEL ENTER +12 dB to -12 dB. • The sound from the subwoofer can be completely RC-995 cut by lowering the SW (subwoofer) setting one (Remote control unit) additional step from -12 dB (setting it to "OFF"). Zone2 surround back speakers are only displayed when "7.1ch" is selected for the Zone2 channel output setting at "7-1. Channel Setup". When the Zone2 surround back speaker setting is set to "1spkr" for "6-1. Speaker Configuration", this is set to "SB". 160