Denon AVR-5805MK2 Owners Manual - Page 52

Notes

Page 52 highlights

6 a. When "Auto" mode is selected: Test tones are automatically emitted from each speaker. A ut o The test tones are emitted from each speaker in the following order, at 4-second intervals the first time and second time around, 2second intervals the third time around and on: (Main unit) FL C FR SRA SRB Flashing 2spkrs SW SLA SLB SBL SBR CH SEL Example: When the volume is set to -11.5 dB ENTER SB 1spkr while the test tone is being produced from the Front Lch (Remote control unit) When the surround back speaker setting is set to "1spkr" for "2-1. Speaker Configuration", this is set to "SB". speaker Use the Cursor left and right buttons to adjust all the speakers to the same volume. TestTone Auto FL : -11.5dB The volume can be adjusted between -12 dB and +12 dB in units of 0.5 dB. b. When "Manual" mode is selected: q Select the speaker. w Adjust all the speakers to the same volume. M a nu al Flashing CH SEL ENTER CH SEL ENTER Example: "Manual" mode is selected. (Main unit) (Remote control unit) (Main unit) (Remote control unit) 7 Enter the setting. CH SEL The Channel Level screen reappears. ENTER TestTone Manual FL : -11.5dB (Main unit) (Remote control unit) To cancel the settings, press the Cursor down button to select "Level Clear" and "Yes" on the Channel Level screen, then make the settings again. A ut o : Manual Yes Yes NOTES: • When adjusting the level of an active subwoofer system, you may also need to adjust the subwoofer's own volume control. • When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode, the channel level adjustments made will affect all surround modes. Consider this mode a Master Channel Level adjustment mode. • After you have completed the SYSTEM SETUP CHANNEL LEVEL adjustments, you can then activate the individual surround modes and adjust channel levels that will be remembered for each of those modes. Then, whenever you activate a particular surround sound mode, your preferred channel level adjustments for just that mode will be recalled. Check the instructions for adjusting channel levels within each surround mode. (See pages 134, 135) • You can adjust the channel levels for each of the following surround modes: PURE DIRECT/DIRECT, STEREO, DOLBY/DTS SURROUND, HOME THX CINEMA, 9CH STEREO, WIDE SCREEN, SUPER STADIUM, ROCK ARENA, JAZZ CLUB, CLASSIC CONCERT, MONO MOVIE, VIDEO GAME and MATRIX. • When using either surround speakers A or B, or when using surround speakers A and B at the same time, be sure to adjust the balance of playback levels between each channel for the various selections of "A or B" and "A and B". 52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192

52
7
Enter the setting.
The Channel Level screen reappears.
To cancel the settings, press the Cursor down button to select “Level Clear” and “Yes” on the
Channel Level screen, then make the settings again.
2−4.Channel
Level
Test
Tone
Test
Tone
Start
Level
Clear
Yes
Yes
Auto
Manual
NOTES:
When adjusting the level of an active subwoofer system, you may also need to adjust the subwoofer’s own volume control.
When you adjust the channel levels while in the SYSTEM SETUP CHANNEL LEVEL mode, the channel level adjustments made will affect
all surround modes. Consider this mode a Master Channel Level adjustment mode.
After you have completed the SYSTEM SETUP CHANNEL LEVEL adjustments, you can then activate the individual surround modes and
adjust channel levels that will be remembered for each of those modes. Then, whenever you activate a particular surround sound mode,
your preferred channel level adjustments for just that mode will be recalled. Check the instructions for adjusting channel levels within
each surround mode. (See pages 134, 135)
You can adjust the channel levels for each of the following surround modes: PURE DIRECT/DIRECT, STEREO, DOLBY/DTS SURROUND,
HOME THX CINEMA, 9CH STEREO, WIDE SCREEN, SUPER STADIUM, ROCK ARENA, JAZZ CLUB, CLASSIC CONCERT, MONO
MOVIE, VIDEO GAME and MATRIX.
When using either surround speakers A or B, or when using surround speakers A and B at the same time, be sure to adjust the balance
of playback levels between each channel for the various selections of “A or B” and “A and B”.
6
a.
When “Auto” mode is selected:
Test tones are automatically emitted from each speaker.
The test tones are emitted from each speaker in the following order,
at 4-second intervals the first time and second time around, 2-
second intervals the third time around and on:
Test
Tone
FL
−11.5
dB
0.0
dB
FR
0.0
dB
SR
0.0
dB
SR
0.0
dB
SBR
0.0
dB
SBL
0.0
dB
SL
0.0
dB
SL
0.0
dB
SW
0.0
dB
Auto
Use the Cursor left and right buttons to adjust all the speakers to the
same volume.
The volume can be adjusted between –12 dB and +12 dB in units of 0.5
dB.
b.
When “Manual” mode is selected:
Example: When the volume is set to –11.5 dB
while the test tone is being
produced from the Front Lch
speaker
FL
SW
1spkr
2spkrs
C
FR
SRA
SBL
SLB
SLA
SB
SRB
SBR
When the surround back speaker setting is set to “1spkr” for “2-1.
Speaker Configuration”, this is set to “SB”.
FL
:
-11.5dB
TestTone Auto
q
Select the speaker.
w
Adjust all the speakers to the same
volume.
Test
Tone
FL
−11.5
dB
0.0
dB
FR
0.0
dB
SR
0.0
dB
SR
0.0
dB
SBR
0.0
dB
SBL
0.0
dB
SL
0.0
dB
SL
0.0
dB
SW
0.0
dB
Manual
Example: “Manual” mode is selected.
FL
:
-11.5dB
TestTone Manual
CH SEL
ENTER
(Main unit)
(Remote control unit)
CH SEL
ENTER
(Main unit)
(Remote control unit)
CH SEL
ENTER
(Main unit)
(Remote control unit)
CH SEL
ENTER
(Main unit)
(Remote control unit)
Flashing
Flashing