Denon AVR-5805MK2 Owners Manual - Page 13
Connecting video components equipped with Component Video color difference video jacks, Component -
UPC - 081757507400
View all Denon AVR-5805MK2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Connecting video components equipped with Component Video (color difference) video jacks (Component - Y, Pb, Pr ; Y, Cb, Cr) • When making connections, also refer to the operating instructions of the other components. • The signals input to the component (color difference) video jacks are not output from the VIDEO output jack (yellow) or the S-Video output jack. • Some video sources with component video outputs are labeled Y, PB, PR, or Y, CB, CR, or Y, B-Y, R-Y. These terms all refer to component video color difference output. • The function assigned to the component video input can be changed at the system setup. For details, see "Setting the Component In Assign". (See pages 71, 72) DVD player Connecting a DVD player COMPONENT VIDEO OUT Y PB PR DVD IN jacks • Connect the DVD player's component (color difference) video output jacks (COMPONENT VIDEO OUTPUT) to the COMPONENT DVD IN jack using 75 Ω/ ohms coaxial video pin-plug cords. • In the same way, another video source with component video outputs such as a DTV/DBS tuner, etc., can be connected to the TV/DBS component (color difference) video jacks. Connecting a monitor TV MONITOR OUT jack • Connect the TV's component (color difference) video input jacks (COMPONENT VIDEO INPUT) to the COMPONENT MONITOR OUT-2 jack using 75 Ω/ohms coaxial video pin-plug cords. • Connect the TV's component (color difference) video input jacks (COMPONENT VIDEO INPUT) to the COMPONENT MONITOR OUT-1 jack using BNC connectors. • The COMPONENT MONITOR OUT-1 and the COMPONENT MONITOR OUT-2 can be used simultaneously. Monitor TV COMPONENT VIDEO IN Y PB PR • The component video input and/or output jacks may be labeled differently on some TVs, monitors or video components (Y, Pb, Pr; Y, Cb, Cr; Y, B-Y, RY). Check the owner's manuals for other components for further information. The Video Conversion Function The AVR-5805 is equipped with a function for up and down converting video signals. Because of this, the AVR-5805's MONITOR OUT jack can be connected to the monitor (TV) with a set of cables offering a higher quality connection, regardless of how the player and the AVR-5805's video input jacks are connected. Generally speaking, connections using the component video jacks offer the highest quality playback, followed by connections using the S-Video jacks, then connections using the regular video jacks (yellow). The flow of the video signals. (Component Video Jacks) (Component Video Jacks) (MONITOR OUT / ZONE2) (S-Video jack) (S-Video jack) (MONITOR OUT / ZONE2) (Video jack) ( This unit's input jacks : only 480i/580i ) (Video jack) (MONITOR OUT / ZONE2) This unit's output jacks Cautions on the Zone2 video conversion function: There is no TBC (Time Base Collector) for Zone2. When the component video terminals are used to connect the AVR-5805 with a TV (or monitor, projector, etc.) and the video (yellow) or S video terminals are used to connect the AVR-5805 with a VCR, depending on the combination of the TV and VCR the picture may flicker in the horizontal direction, be distorted, be out of sync or not display at all when playing video tapes. If this happens, connect a commercially available video stabilizer, etc., with a TBC (time base corrector) function between the AVR-5805 and the VCR, or if your VCR has a TBC function, turn it on. 13