Denon AVR-5805MK2 Owners Manual - Page 157

[4] Outputting a program source to an amplifier, etc., in a ZONE2 room (ZONE2 SELECT mode) 1 Press the ZONE2 SELECT button. 21 2 Select the source you want to output appears on the set's display. (Main unit) (Main unit) 3 Start playing the source to be output. • For operating instructions, refer to the manuals of the respective components. DVD ZONE2 SOURCE [5] Outputting a program source to an amplifier, etc., in a ZONE3 or ZONE4 room (ZONE3, ZONE4 SELECT mode) 1 Press the ZONE3/4/REC SELECT button. The display switches as follows each time the button is pressed. 21 ZONE3 (REC OUT) ZONE4 (Main unit) 2 With "ZONE3 SOURCE" displayed, turn the FUNCTION knob and select the source you wish to output. • The MULTI indicator light. • The display switches the selected source. (Main unit) 3 Start playing the source to be output. • For operating instructions, refer to the manuals of the respective components. The ZONE4 SELECT can also be set with a method similar to the above. DVD ZONE3 SOURCE NOTES: • The signals of the source selected in the ZONE3 mode are also output from the VCR-1, VCR-2, VCR-3, VCR-4 and CDR/TAPE recording output jacks. • Digital signals are not output from the Zone4 audio output jacks. • Refer to pages 152~156 about the MULTI ZONE connections. 157