Denon AVR-5805MK2 Owners Manual - Page 149

NOTES: • The surround speaker setting can also be changed with the SPEAKER button on the Main unit or Remote control unit. • When "Default" is selected and the Cursor left button is pressed, "CINEMA EQ." and "D.COMP." are automatically turned off, "ROOM SIZE" is set to "medium", "EFFECT LEVEL" to "10", "DELAY TIME" to "30ms" and "LFE" to "0dB". • The "ROOM SIZE" expresses the expansion effect for the different surround modes in terms of the size of the sound field, not the actual size of the listening room. • When playing PCM digital signals or analog signals in the DOLBY PRO LOGIC II, DOLBY PRO LOGIC IIx, DTS NEO:6 modes and the input signal switches to a digital signal encoded in Dolby Digital, the Dolby surround mode switches automatically. When the input signal switches to a DTS signal, the mode automatically switches to DTS surround. Tone control setting • Use the tone control setting to adjust the bass and treble as desired. • The tone control function will not work in the PURE DIRECT, DIRECT or Home THX Cinema mode. [1] Adjusting the tone using the Remote control unit 1 Press the SURROUND PARAMETER button. Display the Surround Parameter Menu. The screen selected surround mode appears. (Remote control unit) *Surr Parameter ROOM: medium O N ： OFF D ef au lt Ｙｅｓ 2 Select "TONE". CH SEL ENTER (Remote control unit) *Surr Parameter TONE 2~5 3 Switch to Tone Control screen. CH SEL ENTER (Remote control unit) *Tone Control Tone Def.: ON 6,7 1,7 O N ： OFF D ef au lt Ｙｅｓ O N ： OFF 4 CH SEL ENTER Select Tone Defeat OFF. (Remote control unit) *Tone Control Tone Def.: OFF O N ： OFF 149