Epson Stylus Pro WT7900 User's Guide

Epson Stylus Pro WT7900 Manual

Get Epson Stylus Pro WT7900 PDF manuals and user guides View all Epson Stylus Pro WT7900 manuals
Add to My Manuals
Save this manual to your list of manuals

Epson Stylus Pro WT7900 manual content summary:

  • Epson Stylus Pro WT7900 | User's Guide - Page 1
    Epson Stylus® Pro WT7900 USER'S GUIDE
  • Epson Stylus Pro WT7900 | User's Guide - Page 2
    instructions. Seiko Epson Corporation shall not be liable for any damages or problems arising from the use of any options or any consumable products other than those designated as Original Epson Products or Epson Approved Products by Seiko Epson Corporation. Trademarks Epson, Epson Stylus
  • Epson Stylus Pro WT7900 | User's Guide - Page 3
    FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference
  • Epson Stylus Pro WT7900 | User's Guide - Page 4
  • Epson Stylus Pro WT7900 | User's Guide - Page 5
    Ink 37 Aligning the Print Head 40 Connecting to Your System 41 Installing the Software 41 Updating Your Printer Firmware 43 Checking the Current Firmware Version 43 Downloading and Updating the Firmware 43 Configuring the Printer's Network Adapter 44 2 Using Film and Other Media Using Epson
  • Epson Stylus Pro WT7900 | User's Guide - Page 6
    Built-in Cutter 56 Printing Trim Lines 56 Removing the Roll from the Printer 57 Using the Film Basket 59 Attaching the Film Basket 60 Removing and Storing the Film Basket 64 Using Epson Paper 65 Guidelines for Using Epson Media 65 Loading Cut Sheets 66 Loading Heavy Sheets 68 Adjusting the
  • Epson Stylus Pro WT7900 | User's Guide - Page 7
    Printer 103 4 Solving Problems Diagnosing Problems 105 Checking Error Messages and Lights 106 Improving Print Quality 112 Solving Operational Problems 114 Solving Miscellaneous Printing Problems 115 Solving Paper Problems 116 Clearing Paper Jams 117 Uninstalling and Reinstalling the Driver
  • Epson Stylus Pro WT7900 | User's Guide - Page 8
    8 | Contents Media 122 Roll Paper 122 Cut Sheets 123 Printable Area 123 Ink Cartridges 123 B Control Panel Summary Control Panel Buttons and Lights 125 LCD Display Icons 127 Menu Setting Summary 128 Index 8
  • Epson Stylus Pro WT7900 | User's Guide - Page 9
    Documents & Manuals. This User's Guide provides important information on setting up and using your printer, loading paper, and replacing ink cartridges. It also tells you how to maintain your printer to keep it working at its best, and provides troubleshooting tips in case you have a problem. For
  • Epson Stylus Pro WT7900 | User's Guide - Page 10
    . Options and Accessories Your Epson Stylus® Pro WT7900 offers these optional upgrades and accessories: Optional equipment Option Epson SpectroProofer 24-inch Epson SpectroProofer 24-inch UV One-year extended warranty for printer Two-year extended warranty for printer One-year extended warranty
  • Epson Stylus Pro WT7900 | User's Guide - Page 11
    printer serial number and proof of purchase. Visit Epson's support website at epson.com/support (U.S.) or epson.ca/support (Canada) and select your product for solutions to common problems. You can download drivers, firmware, and documentation, get FAQs and troubleshooting advice, or e-mail Epson
  • Epson Stylus Pro WT7900 | User's Guide - Page 12
    12 | Introduction Important Safety Instructions Before using your printer, read the following safety instructions to make sure you use the equipment safely and effectively. • The Epson Stylus Pro WT7900 weighs approximately 220 lb (100 kg). When lifting it onto the stand, make sure you have four
  • Epson Stylus Pro WT7900 | User's Guide - Page 13
    safely capped. • If you use an extension cord with the printer, make sure the total ampere printer's case. • Do not put your hand inside the printer during printing. • Do not move the print head by hand unless instructed to do so by an Epson service technician; otherwise you may damage the printer
  • Epson Stylus Pro WT7900 | User's Guide - Page 14
    14 | Introduction Caution: To prevent ink leakage, don't shake cartridges too forcefully. Ink Cartridge Safety Instructions • Keep ink cartridges out of the reach of children and do not drink the ink. • Store ink cartridges in a cool, dark place. • If ink gets on your skin, wash it off with soap
  • Epson Stylus Pro WT7900 | User's Guide - Page 15
    Introduction | 15 Printer Parts These illustrations show the parts of the Epson Stylus Pro WT7900. Front Roll paper holder Front cover Roll paper cover Control panel Ink bay Film basket guide Ink bay Manual holder Casters Film basket Paper basket Back Optional SpectroProofer port Network
  • Epson Stylus Pro WT7900 | User's Guide - Page 16
    (up) Head cleaning button Paper release (ePlaten™) light and button Power light and button OK button Menu button Pause/reset light and button Ink open button Paper cut button Paper feed button (down) LCD display Paper source button LCD Display Platen gap Roll paper setting margin Paper
  • Epson Stylus Pro WT7900 | User's Guide - Page 17
    Epson Stylus Pro WT7900 • Connecting the power cord • Installing ink • Connecting to your computer and a network • Installing the printer software • Updating the printer firmware • Configuring the printer sure you have sufficient space to set up and use the printer-at least 12 inches (300 mm) on all
  • Epson Stylus Pro WT7900 | User's Guide - Page 18
    Printer Unpacking and Assembling the Stand 1. Lift the box up and away from the shipping pallet. Then remove the box containing the stand and paper basket. 2. Unpack the stand and make sure you have all these items. Note: Make sure you tighten all bolts before moving to the next section. Manual
  • Epson Stylus Pro WT7900 | User's Guide - Page 19
    Setting Up the Printer | 19 4. Fasten the strut with 3 bolts as shown. Use the hex wrench to tighten the bolts. 19
  • Epson Stylus Pro WT7900 | User's Guide - Page 20
    20 | Setting Up the Printer 5. Insert the strut into the right side and fasten it with 3 bolts as shown. 6. Lock the casters. 20
  • Epson Stylus Pro WT7900 | User's Guide - Page 21
    1. Make sure you have all the items shown below: 11 Ink cartridges Cable guides Printer Note: Make sure you save the box and packaging in case you need to ship the printer. Bundled roll paper Roll paper holders Documentation and software CD Power cord 2. Remove the cardboard panels and other
  • Epson Stylus Pro WT7900 | User's Guide - Page 22
    22 | Setting Up the Printer 4. Lower the printer onto the stand with the stand's horizontal strut in front, as shown. Align the pegs on the stand with the holes on the bottom of the printer. 5. Fasten the printer to the stand with the wing screws and washers. 22
  • Epson Stylus Pro WT7900 | User's Guide - Page 23
    | 23 Attaching the Paper Basket The paper basket is a cloth sheet that attaches to the printer stand and catches your paper prints as they come out. 1. Make sure you have all the parts shown below: Basket cloth 2 Pins 2 Black plastic connectors 1
  • Epson Stylus Pro WT7900 | User's Guide - Page 24
    24 | Setting Up the Printer 3. Use the pins to fasten the posts in place. Make sure the pins are pushed in all the way. 4. Insert the round and square poles into the basket cloth as shown. 24
  • Epson Stylus Pro WT7900 | User's Guide - Page 25
    Setting Up the Printer | 25 5. Place the basket under the printer as shown. 6. Snap the center pole into the holders on each side of the stand. 25
  • Epson Stylus Pro WT7900 | User's Guide - Page 26
    26 | Setting Up the Printer 7. Push the black plastic connectors onto both ends of the square pole. 8. Push the black plastic connectors onto the posts on each side of the stand. 26
  • Epson Stylus Pro WT7900 | User's Guide - Page 27
    Setting Up the Printer | 27 9. Snap the back pole into the holders as shown. 10. Hook the loops around the pins on the back of the stand legs. 27
  • Epson Stylus Pro WT7900 | User's Guide - Page 28
    28 | Setting Up the Printer 11. Insert the rod into the fabric channel. 12. Insert the free ends of the rod into the holes in the sides of the stand. 28
  • Epson Stylus Pro WT7900 | User's Guide - Page 29
    cloth off the ground, loop the tabs over the ends of the rod as shown. 14. Attach the paper guides to the bottom of the printer as shown: 15. Make sure the paper guides hang straight down, then fold the paper basket all the way up so it's in the vertical position. 29
  • Epson Stylus Pro WT7900 | User's Guide - Page 30
    30 | Setting Up the Printer Assembling the Film Basket The film basket is used when printing on special media such as Epson ClearProof Film, and can be detached and stored when printing on paper (see page 64). Follow the steps below to prepare it for use. 1. Make sure you have all the parts shown
  • Epson Stylus Pro WT7900 | User's Guide - Page 31
    Setting Up the Printer | 31 Note: Once inserted, the pins cannot be removed. 3. Insert the pins through the guides, pressing them into place. 4. Open one of the scissor arms as shown. Insert two long rods (A) and one short rod (B) into the plastic connectors. 31
  • Epson Stylus Pro WT7900 | User's Guide - Page 32
    32 | Setting Up the Printer 5. Feed the basket cloth onto rods A and B as shown. 6. Connect the other scissor arm as shown. 32
  • Epson Stylus Pro WT7900 | User's Guide - Page 33
    Setting Up the Printer | 33 Note: Once inserted, the pins cannot be removed. 7. Insert six pins into the plastic such as paper rolls in this basket, or it may get damaged. The basket can support up to 6.6 lbs (3 kg). Now go to "Completing Setup and Connecting the Power Cord" on page 34. 33
  • Epson Stylus Pro WT7900 | User's Guide - Page 34
    and Connecting the Power Cord 1. Attach the manual holder to the left or right side of the stand. Store the printer manuals in the holder. 2. Unlock the casters. Then move the printer to the place of use. (The casters are meant for moving the printer for only a short distance.) Lock the casters
  • Epson Stylus Pro WT7900 | User's Guide - Page 35
    | 35 Tip: After removing protective materials, touch a metal part of the printer to discharge static electricity. 3. Remove any packing tape and plastic film. Check these areas: • the front cover • the ink compartment covers • the maintenance tank(s) 4. Open the roll paper cover and remove
  • Epson Stylus Pro WT7900 | User's Guide - Page 36
    36 | Setting Up the Printer 5. Open the front cover and remove the tape and packing material. Save the packing material in case you need to ship the printer. 6. Close the front cover. 7. Connect the power cord to the AC inlet on the back of the printer. 36
  • Epson Stylus Pro WT7900 | User's Guide - Page 37
    minutes to complete. To prevent damage, never unplug the printer during this process. 9. Plug the power cord into a properly grounded electrical outlet. Installing Ink Use the ink cartridges that came with your printer for initial ink charging. During the initial installation process, it is normal
  • Epson Stylus Pro WT7900 | User's Guide - Page 38
    38 | Setting Up the Printer 2. Open both ink covers. Caution: Do not touch the green chip on top of the cartridge, or you may damage it. 3. Remove the ink cartridges from their packages. Gently shake each cartridge as shown below for the following durations: • White ink cartridge: 30 seconds (
  • Epson Stylus Pro WT7900 | User's Guide - Page 39
    (VM) 8 Cleaning Liquid (CL) 9 Green (G) 10 Photo Black (PK) 11 Vivid Light Magenta (VLM) 5. Install the ink cartridges in the printer. Hold each cartridge with the arrow pointing toward the printer, then insert it into its slot until it clicks into place. Make sure you insert each cartridge
  • Epson Stylus Pro WT7900 | User's Guide - Page 40
    . After ink charging is completed, you need to load paper before READY will appear on the display. Aligning the Print Head Before using your printer, you need to align the print head for best results. 1. Load the bundled roll paper included with the printer. See page 49 for instructions on loading
  • Epson Stylus Pro WT7900 | User's Guide - Page 41
    Setting Up the Printer | 41 Connecting to Your System You can use USB and/or Ethernet network connections. For USB on your computer or router. Installing the Software Follow these steps to install the software for your printer (Windows only). 1. Make sure your printer is turned off. 2. Turn on your
  • Epson Stylus Pro WT7900 | User's Guide - Page 42
    for a newer version of your driver on the Epson support site at epson.com/support (U.S.) or epson.ca/support (Canada). If you see an AutoPlay window, click Run Setup.exe. If you see a User Account Control screen, click Yes or Continue. 3. Insert the printer software CD-ROM in your computer. The
  • Epson Stylus Pro WT7900 | User's Guide - Page 43
    you need to download the firmware manually, visit Epson's support website at epson.com/support (U.S.) or epson.ca/support (Canada), select your product, then click Drivers & Downloads. Choose the latest firmware and follow the instructions on the screen. 3. Make sure your printer is turned on, its
  • Epson Stylus Pro WT7900 | User's Guide - Page 44
    is complete, close the Firmware Updater window and Epson LFP Remote window. If you connected your printer to a network, follow the instructions in the next section to configure the printer for your network. Configuring the Printer's Network Adapter Once the printer is connected to your network
  • Epson Stylus Pro WT7900 | User's Guide - Page 45
    45 Chapter 2: Using Film and Other Media The Epson Stylus Pro WT7900 is designed to print with white ink on selected Epson media, such as Epson ClearProof™ Film and CrystalClear™ Film. These media are available as rolls in either a 17-inch or 24-inch width (432 mm or 610 mm). You can also print on
  • Epson Stylus Pro WT7900 | User's Guide - Page 46
    the film basket and use it to catch your prints (see page 59). • If you've been printing with media other than Epson film, paper dust may have accumulated on the platen. This can transfer to your film during printing. If necessary, clean the inside of the printer as described on page 99
  • Epson Stylus Pro WT7900 | User's Guide - Page 47
    Using Film and Other Media | 47 Caution: Static electricity is generated when removing Loading Film in the Printer See the sections below for instructions on making appropriate printer settings and loading the film for printing. Selecting the Paper Type Whenever you print with Epson film, be sure
  • Epson Stylus Pro WT7900 | User's Guide - Page 48
    Film and Other Media Tip: You can use Maintenance mode to switch the units of measurement in the printer from meters to feet. See page 93 for instructions. Setting Up Automatic Media Tracking and Identification Before you load roll media in the printer, you can set up the automatic media tracking
  • Epson Stylus Pro WT7900 | User's Guide - Page 49
    Using Film and Other Media | 49 Placing the Roll in the Printer 1. Open the roll paper cover. 2. Push the lock lever down firmly, then move the roll paper holder to the left. 49
  • Epson Stylus Pro WT7900 | User's Guide - Page 50
    50 | Using Film and Other Media 3. Set the roll on top of the printer. 4. If necessary, adjust the roll paper adapters to fit the core size of the roll paper. 2-inch core: 3-inch core: 50
  • Epson Stylus Pro WT7900 | User's Guide - Page 51
    Using Film and Other Media | 51 5. Release the tension lever on both adapters. 6. Push the adapters into the paper core at both ends of the roll. Then press down on the tension levers to secure the adapters on the roll. 51
  • Epson Stylus Pro WT7900 | User's Guide - Page 52
    52 | Using Film and Other Media 7. Move the roll paper to the right side until it touches the roll paper guide. 8. Slide the roll paper holder to align the u arrow with the roll paper adapter. 52
  • Epson Stylus Pro WT7900 | User's Guide - Page 53
    Using Film and Other Media | 53 9. Roll the paper slowly into position. 10. Grasp the handle on the left roll paper holder and slide it to the right as far as it will go. Make sure the roll paper is pushed all the way to the right, as shown. 53
  • Epson Stylus Pro WT7900 | User's Guide - Page 54
    54 | Using Film and Other Media 11. Pull up the lock lever to lock the paper in place. Caution: To avoid feeding page is printed. • Choose if you want to decide for yourself when to cut the paper (see page 56 for instructions). 2. If the light is not on, press the button to release the platen. 54
  • Epson Stylus Pro WT7900 | User's Guide - Page 55
    Using Film and Other Media | 55 3. Insert the paper into the slot. Caution: Don't pull the paper down further than shown, or it may get wrinkled
  • Epson Stylus Pro WT7900 | User's Guide - Page 56
    button to Note: The minimum printout length when using Auto Cut is 16.5 inches (420 mm). manually. Printing Trim Lines You can print trim lines on the right edge of your pages (Auto Cut On) or on the right and bottom edge (Auto Cut Off). 1. Press r Menu. 2. Press r again to select the PRINTER
  • Epson Stylus Pro WT7900 | User's Guide - Page 57
    Using Film and Other Media | 57 Removing the Roll from the Printer 1. Open the roll paper cover. 2. Press the button to release the paper. It is rewound automatically. If automatic media tracking is on, the barcode and
  • Epson Stylus Pro WT7900 | User's Guide - Page 58
    58 | Using Film and Other Media 4. Push down the lock lever firmly to release it. Then grasp the handle on the roll paper holder and slide it all the way to the left to release the roll. 5. Roll the paper forward so that it rests on top of the printer. 58
  • Epson Stylus Pro WT7900 | User's Guide - Page 59
    place heavy objects such as paper rolls in this basket, or it may get damaged. The basket can support up to 6.6 lb (3 kg). Using the Film Basket Use the film basket whenever you print on Epson film. The film basket protects your prints from smearing or other damage, and can hold prints up to
  • Epson Stylus Pro WT7900 | User's Guide - Page 60
    If you're using the optional SpectroProofer, you don't have to remove it in order to attach the film basket. Attaching the Film Basket Before attaching the film basket, you need to move the paper basket to the fully upright position. Follow the instructions below. 1. Lower the paper guides as shown
  • Epson Stylus Pro WT7900 | User's Guide - Page 61
    Using Film and Other Media | 61 2. Raise the main arm of the paper basket all the way up. Then raise the lower part of the basket and secure it with the hook-and-loop fastener straps, as shown below. 3. Unhook the storage cord and open the film basket. 61
  • Epson Stylus Pro WT7900 | User's Guide - Page 62
    62 | Using Film and Other Media If desired, bundle the cord using the strap as shown. 4. Make sure the straps shown below are positioned correctly. If necessary, slide the straps to the indicated positions. 62
  • Epson Stylus Pro WT7900 | User's Guide - Page 63
    Using Film and Other Media | 63 5. Align the basket with the guides on the printer. If necessary, push down on the front of the basket to adjust its height. 6. Slide the basket into the channels on the guides. Make sure the basket is inserted all the way. 63
  • Epson Stylus Pro WT7900 | User's Guide - Page 64
    and Other Media Removing and Storing the Film Basket When you're done using the film basket, you can remove it from the printer and fold it up for storage as described below. 1. Pull straight back on the film basket to detach it. Tip: For best results, loop the
  • Epson Stylus Pro WT7900 | User's Guide - Page 65
    Other Media | 65 Using Epson Paper Although the Epson Stylus Pro WT7900 is designed to work primarily with Epson film, it is possible to print on other selected Epson paper types. Check the Epson Pro Imaging website at www.proimaging.epson.com or your Epson Professional Imaging Authorized Reseller
  • Epson Stylus Pro WT7900 | User's Guide - Page 66
    66 | Using Film and Other Media non-Epson paper, consult the manufacturer for the best setting. You may have to experiment with different settings to determine which one is best for the media you're using. • Always select the correct paper source (roll or sheet) in both the printer software and on
  • Epson Stylus Pro WT7900 | User's Guide - Page 67
    Using Film and Other Media | 67 2. Press the l Paper Source button until the sheet icon appears on the LCD display. . Press OK to save your settings. 6. Print your page. After it is finished, the sheet stays in the printer. 7. To remove your print, press the d button while holding the sheet. 67
  • Epson Stylus Pro WT7900 | User's Guide - Page 68
    68 | Using Film and Other Media Note: You may need to increase the suction by pressing the u button. This helps hold the paper in place during loading and printing. Loading Heavy Sheets Make sure you load paper in the portrait orientation (short edge first). 1. Make sure the printer is turned on
  • Epson Stylus Pro WT7900 | User's Guide - Page 69
    Using Film and Other Media | 69 Note: If you notice head strikes on your prints, make sure your paper is flat. You can also try changing the PLATEN GAP setting to WIDE. If that doesn't solve the problem, try changing it to WIDER. Caution: To avoid damaging the printer, make sure you do not
  • Epson Stylus Pro WT7900 | User's Guide - Page 70
    up either to catch the paper under the printer or in front of the printer. If you're been printing with Epson film, you may need to remove the printer. Use this method for paper more than 19 mil (0.5 mm) thick or any prints that are 36 inches (91 cm) or longer. 1. If you are using the paper guides
  • Epson Stylus Pro WT7900 | User's Guide - Page 71
    Using Film and Other Media | 71 3. Raise the front of the basket so that the surface is taut. Then lower the paper guides so that your . Catching Printouts Under the Printer Follow these steps to catch printouts under the printer: 1. Raise the paper guides and tilt the front of the basket down.
  • Epson Stylus Pro WT7900 | User's Guide - Page 72
    the way up. Fasten the front of the basket with the straps. Storing the Paper Basket If you are not using the paper basket, you can fold it out of the way. 1. Raise the paper guides, then adjust the straps as needed and raise the front of the basket. Lower the paper
  • Epson Stylus Pro WT7900 | User's Guide - Page 73
    media type in your Epson printer software, the driver automatically determines the best settings for your paper. However, you may want to fine-tune how the printer handles various media-especially if you use non-Epson paper or a paper not supported by the driver. Use the paper configuration settings
  • Epson Stylus Pro WT7900 | User's Guide - Page 74
    you print with non-Epson media and avoid smearing the ink. You can make the print head wait up to 10 seconds after each pass to allow ink to dry on the media or film. 11. When done, press . After you settings, you can use the TEST PRINT menu to print out a list of paper numbers showing the settings
  • Epson Stylus Pro WT7900 | User's Guide - Page 75
    press d to select PAPER TYPE, then press r. 3. Press d to select CUSTOM PAPER, then press r. 4. Press u or d to select the paper number you want to use. 5. Press OK. The paper number you selected is displayed on the LCD with a check mark. 6. Press to exit the menu. The paper number you selected
  • Epson Stylus Pro WT7900 | User's Guide - Page 76
    76 | Using Film and Other Media 76
  • Epson Stylus Pro WT7900 | User's Guide - Page 77
    This chapter describes the following maintenance procedures for your Epson Stylus Pro WT7900: • Maintaining white ink cartridges • Checking printer status • Checking and cleaning the print head • Aligning the print head • Replacing ink cartridges • Changing the date and time • Performing additional
  • Epson Stylus Pro WT7900 | User's Guide - Page 78
    . Caution: Do not touch the green chip on top of the cartridge. See the sections below for special storage instructions for white ink cartridges, and to determine when and how much to shake them. Note: Use ink cartridges before the expiration date printed on the box. Storing and Shaking White
  • Epson Stylus Pro WT7900 | User's Guide - Page 79
    needs to be shaken even if the printer isn't being used. If necessary, turn on the printer once a week to remove and shake the cartridge. Shaking the Installed White Ink Cartridge Once you've installed a white ink cartridge in the printer, it needs to be shaken weekly to maintain image quality. The
  • Epson Stylus Pro WT7900 | User's Guide - Page 80
    80 | Maintaining and Transporting the Printer 3. Open the cover all the way. 4. Press in the white ink cartridge and release it. The cartridge pops out. 5. Pull the cartridge straight out of its slot. 80
  • Epson Stylus Pro WT7900 | User's Guide - Page 81
    . Then insert it into the slot until it clicks into place. 8. Close the ink cover. Checking Printer Status Using the control panel, you can check the amount of ink remaining, the total number of prints, and the status of your maintenance tank(s), and other information. You can print out a status
  • Epson Stylus Pro WT7900 | User's Guide - Page 82
    parts need to be replaced by an authorized Epson service technician. Note: You can change the units of measurement from centimeters to inches and feet using maintenance mode on the printer's control panel. See page 92 for instructions. Printing Status Information The status check sheet shows
  • Epson Stylus Pro WT7900 | User's Guide - Page 83
    printer. If you need to check the white ink nozzles, use film to ensure that the ink INK if you think there may be a problem with the white ink nozzles. This option ensures that white ink is included as part of the test pattern. If necessary, the printer will replace cleaning liquid with white ink
  • Epson Stylus Pro WT7900 | User's Guide - Page 84
    LCD display and contact Epson as described on page 11. • If any dots or segments are missing or deflected, as shown below, one or more nozzles may be clogged. If the cleaning nozzles are clogged, the printer shows their status as "NG" or no good. If either of these problems appears, run a cleaning
  • Epson Stylus Pro WT7900 | User's Guide - Page 85
    cleaning cycle. If necessary, turn the printer off and leave it overnight to dissolve any dried ink, then clean the print head again the following morning with a normal cleaning cycle. If you continue to detect a problem with the white ink nozzles, perform a white ink refresh as described on page 86
  • Epson Stylus Pro WT7900 | User's Guide - Page 86
    your printouts is inconsistent even after cleaning the print head, you may need to refresh the white ink supply-especially if the printer hasn't been used for more than a year. This helps clear any white ink components that have settled in the supply line. Before starting, make sure you have already
  • Epson Stylus Pro WT7900 | User's Guide - Page 87
    print correctly. Follow these steps to align the print head: 1. Load the bundled roll paper included with the printer. You can also use Epson film or other compatible Epson media. 2. Press r Menu. 3. Press u or d until HEAD ALIGNMENT is selected, then press r. 4. Make sure PAPER THICKNESS is
  • Epson Stylus Pro WT7900 | User's Guide - Page 88
    88 | Maintaining and Transporting the Printer Tip: You can store partially used ink cartridges for up to 6 months. If you do so, Epson recommends covering the openings with tape to protect them from dust. 8. Make sure AUTO is highlighted, then press r. 9. Make sure UNI-D (uni-directional) is
  • Epson Stylus Pro WT7900 | User's Guide - Page 89
    You can purchase genuine Epson ink and paper from an Epson Professional Imaging Authorized Reseller. To find the nearest reseller, visit www.proimaging.epson.com (U.S. sales), www.epson.ca (Canadian sales), or call 800-GO-EPSON (800-463-7766). Before you start, make sure the printer is turned on
  • Epson Stylus Pro WT7900 | User's Guide - Page 90
    gets in your eyes, flush them immediately with water. 4. Remove the expended ink cartridge from the printer. Tip: It's a good idea to save your first set of expended cartridges so you can use them for transporting the printer, if necessary. 5. Make sure the replacement cartridge is the correct color
  • Epson Stylus Pro WT7900 | User's Guide - Page 91
    you may have the wrong cartridge. Check the package and product code. If the B Ink light remains on after installing the cartridge, it may not be inserted fully. 7. Hold the cartridge with the arrow pointing toward the printer. Then insert it into the slot until it clicks into place. Don't force it
  • Epson Stylus Pro WT7900 | User's Guide - Page 92
    you make special settings and perform maintenance procedures that may be needed occasionally. You can use maintenance mode to do the following: • Change the language or units of measurements used on the printer's control panel menus. • Adjust the maximum value for roll paper tension. • Run a "super
  • Epson Stylus Pro WT7900 | User's Guide - Page 93
    Maintaining and Transporting the Printer | 93 Note: The CUSTOM setting in maintenance mode is not normally used. 3. Use the d and u buttons to select the settings described below. If you need to back up to the previous menu level, press l. • To change the language
  • Epson Stylus Pro WT7900 | User's Guide - Page 94
    Note: If the optional SpectroProofer is attached to the printer, remove it following the instructions that came with it. Replacing the Paper Cutter If you notice that your paper isn't being cut cleanly, the cutter may need to be replaced.
  • Epson Stylus Pro WT7900 | User's Guide - Page 95
    Maintaining and Transporting the Printer | 95 8. Loosen the screw using a Phillips-head screwdriver. 9. Carefully remove the cutter. 10. Dispose of the cutter in accordance with local regulations. 95
  • Epson Stylus Pro WT7900 | User's Guide - Page 96
    the new cutter to the holder. Align the white pin with the white hole as shown. 2. Firmly tighten the screw using a Phillips-head screwdriver. Note: Reinstall the optional SpectroProofer if necessary, following the instructions that came with it. 3. Insert the cover, then press it closed. 96
  • Epson Stylus Pro WT7900 | User's Guide - Page 97
    gets flushed from the system during the initial ink charge and manual and automatic print head cleaning. When the tank is almost full, the message MAINTENANCE TANK NEARLY FULL appears on the LCD display. When the tank is completely full, the printer stops working and MAINTENANCE TANK FULL appears on
  • Epson Stylus Pro WT7900 | User's Guide - Page 98
    of the printer) and gently pull it out. Then place the tank in the plastic bag included with the new one. Caution: Be careful not to spill ink from the maintenance tank when removing it. Hold it upright at all times and dispose of it carefully. 2. Place the used tank in the
  • Epson Stylus Pro WT7900 | User's Guide - Page 99
    mechanism or electronic components. Don't use a hard or abrasive brush. Don't spray the inside of the printer with lubricants; unsuitable oils can damage the mechanism. Contact Epson if you think the printer needs lubrication. Cleaning the Printer To keep your printer working at its best, clean it
  • Epson Stylus Pro WT7900 | User's Guide - Page 100
    assembly using a soft brush. 7. If the outer case is dirty, clean it with a soft, clean cloth dampened with mild detergent. Keep the ink cartridge the printer a longer distance, you should repack it using the original box and packing materials. Follow the instructions below to prepare the printer for
  • Epson Stylus Pro WT7900 | User's Guide - Page 101
    panel stop flashing and go out, and then unplug the printer. 2. Remove the following parts: • Power cord and interface cables • Film and paper baskets • All paper or other media • Optional SpectroProofer (if installed) 3. Leave the ink cartridges installed. 4. Open the front cover and reinstall the
  • Epson Stylus Pro WT7900 | User's Guide - Page 102
    for information about setting up the printer after transporting it. To ship the printer a longer distance, you should repack it using the original box and packing materials. If you don't have the original packaging, you can purchase replacement packaging from Epson. See page 10 for more information
  • Epson Stylus Pro WT7900 | User's Guide - Page 103
    almost identical to setting it up for the first time. Keep in mind that if you haven't used the printer for more than a week, you'll need to turn it on and shake the white ink cartridge (see page 79). You may need to run a cleaning cycle (page 83) and realign the print
  • Epson Stylus Pro WT7900 | User's Guide - Page 104
    (see page 83). Check the results and clean the print head, if necessary (see page 84). 3. If the printer hasn't been used for more than a year, you may need to refresh the white ink supply (see page 86). 4. You may also need to realign the print head (page 87) to ensure good print
  • Epson Stylus Pro WT7900 | User's Guide - Page 105
    driver Diagnosing Problems The printer includes a number of ways to help you diagnose problems: • To identify the most common problems, problem is caused by the printer itself, print a status sheet from the control panel. See page 81 for instructions. • Review the FAQs at www.proimaging.epson.com
  • Epson Stylus Pro WT7900 | User's Guide - Page 106
    includes various lights and an LCD display to indicate the status of the printer: Paper Ink light light Paper release (ePlaten) light Power light Pause/reset light LCD display When your paper runs out, ink is low, or a problem occurs, a message appears on the LCD display, and the lights on the
  • Epson Stylus Pro WT7900 | User's Guide - Page 107
    | 107 The following table lists the error messages in alphabetical order and includes an explanation and instructions for correcting the problem: Message (in alphabetical order) CALL FOR SERVICE CANNOT OPEN INK COVER CLEANING ERROR AUTOMATIC HEAD CLEANING FAILED RETRY? CLEANING ERROR NOT ENOUGH
  • Epson Stylus Pro WT7900 | User's Guide - Page 108
    be used with this printer. If you are replacing ink cartridges, check the package and product code. Replace the ink cartridge with a genuine Epson ink cartridge. INK CARTRIDGE The ink cartridge is expended. Replace the ink cartridge; see page 88. INK LOW REPLACE INK CARTRIDGE INK CARTRIDGE
  • Epson Stylus Pro WT7900 | User's Guide - Page 109
    Solving Problems | 109 Message (in alphabetical order) NO CARTRIDGE INSTALL INK CARTRIDGE NO MAINTENANCE TANK remove the paper. Paper is not loaded correctly. Paper has jammed in the printer. The paper roll is almost used up. Press the correctly. button, then reload paper Press the button and
  • Epson Stylus Pro WT7900 | User's Guide - Page 110
    to clear the error, then select the right paper. PAPER SETTING ERROR CHECK THE PAPER SOURCE IN THE DRIVER SETTINGS AND LOAD PAPER CORRECTLY The paper source selected in your printer software and the control panel do not match. Check the paper source settings and make sure the paper is loaded
  • Epson Stylus Pro WT7900 | User's Guide - Page 111
    . Replace the maintenance tank with a genuine Epson maintenance tank; see page 97. It's been a month since the white ink cartridge was shaken. To prevent possible clogging, the printer stops working. To continue printing, you must shake the white ink cartridge. See page 79 for instructions. 111
  • Epson Stylus Pro WT7900 | User's Guide - Page 112
    head. ◗ If you haven't printed with white ink for a long time, you may need to refresh the white ink supply; see page 86. ◗ Make sure the AUTO WT INK REFRESH setting hasn't been turned off in the Printer Setup menu. ◗ When storing and using Epson film, strictly follow the temperature and humidity
  • Epson Stylus Pro WT7900 | User's Guide - Page 113
    the inside of the printer. Clean the paper path as described on page 99. ◗ If ink is smeared on the bottom edge of your print, the paper is curled toward the printable side. Flatten the paper or curl it toward the other side. Although the Epson Stylus Pro WT7900 is designed to work primarily with
  • Epson Stylus Pro WT7900 | User's Guide - Page 114
    , turn off the power and unplug the power cord immediately. Contact Epson for assistance; see page 11 for details. If none of these suggestions help, try the solutions below. Problem The printer stops printing unexpectedly. The printer sounds as if it's printing, but nothing prints. Nothing prints
  • Epson Stylus Pro WT7900 | User's Guide - Page 115
    they are within the printer's printable area. ◗ Paper is loaded incorrectly. Follow the instructions beginning on page 45 to software is installed correctly and the printer is selected. ◗ Make sure the paper size setting in your printer software is correct for the paper you're using. The printer
  • Epson Stylus Pro WT7900 | User's Guide - Page 116
    not operate correctly. If you're using non-Epson media or a non-supported Epson paper type, you may need to adjust the settings for the paper in your printer software, or create custom paper settings using the printer's control panel; see page 73. • See the instructions included with the paper, and
  • Epson Stylus Pro WT7900 | User's Guide - Page 117
    Solving Problems | 117 Clearing Paper Jams When roll paper gets jammed in the printer, printing stops and you see a paper jam message on the LCD display. Follow these steps to clear a paper jam: 1. Cut the paper at the paper
  • Epson Stylus Pro WT7900 | User's Guide - Page 118
    118 | Solving Problems 4. Open the front cover if necessary. 5. Carefully pull down the jammed paper. Caution: To avoid damaging the printer, do not touch the rollers, ink absorption pads, ink tubes, or cables around the print head. 6. Close the front cover, if necessary. Press the Ppower button to
  • Epson Stylus Pro WT7900 | User's Guide - Page 119
    you need to uninstall and then reinstall the communication driver for any reason, follow the instructions below. 1. Do one of the following: Windows 7 or Windows Vista: Click > Control Panel > Uninstall a program. Select EPSON Printer Software in the program list. Windows XP: Click Start > Control
  • Epson Stylus Pro WT7900 | User's Guide - Page 120
    120 | Solving Problems 120
  • Epson Stylus Pro WT7900 | User's Guide - Page 121
    container) Environmental specifications for the media you're using may be more restrictive; see page 45 if you're using Epson film. Electrical Specification Rated voltage Rated frequency Input 1 W or less in power off mode Check the label on the back of your printer for voltage information. 121
  • Epson Stylus Pro WT7900 | User's Guide - Page 122
    quality of any non-Epson brand or type of paper. Always test samples of paper stock before purchasing large quantities or printing large jobs. Media Roll Paper Maximum roll width Maximum roll length Weight range Paper thickness Roll paper compatibility Maximum roll paper diameter 24 inches (610 mm
  • Epson Stylus Pro WT7900 | User's Guide - Page 123
    Epson cartridges and do not refill them. The use of other products may affect your print quality and could result in printer damage. Yields vary considerably based on images printed, print settings, paper type, frequency of use, and temperature. For print quality, a small amount of ink remains
  • Epson Stylus Pro WT7900 | User's Guide - Page 124
    124 | Specifications 124
  • Epson Stylus Pro WT7900 | User's Guide - Page 125
    Pause/reset light and button Paper cut button Ink open button Paper feed button (down) LCD display Paper source button See "Checking Error Messages and Lights" on page 106 for instructions on responding to problems indicated by the printer lights. Button P Power Pause/reset r Menu l Paper
  • Epson Stylus Pro WT7900 | User's Guide - Page 126
    Paper feed (down) u Paper feed (up) OK Print head cleaning Ink open Description Feeds the paper forward when loaded. Press and hold to the LCD panel When held for 3 seconds when the printer is drying ink, stops the ink drying process and ejects the paper Lets you select the print head cleaning mode
  • Epson Stylus Pro WT7900 | User's Guide - Page 127
    ; see page 128 for details Displays when the ROLL PAPER COUNTER setting is turned on in the PRINTER SETUP menu; see page 128 for details Ink icons Ink low (flashing) Ink expended, cartridge error, or no cartridge (flashing) Maintenance tank icons Maintenance tank nearly full Maintenance tank
  • Epson Stylus Pro WT7900 | User's Guide - Page 128
    enter menu mode and select the settings summarized here. Menu setting PRINTER SETUP menu PLATEN GAP PAGE LINE ROLL PAPER MARGIN PAPER SIZE CHECK PAPER SKEW CHECK AUTO NOZZLE CHECK PRINT NOZZLE PATTERN AUTO WT INK REFRESH INITIALIZE SETTINGS Description Adjusts the distance from the print head to
  • Epson Stylus Pro WT7900 | User's Guide - Page 129
    ; see the on-screen Network Guide for details. JOB INFORMATION Prints printer's firmware version number. INK LEVEL Displays the status of the ink in the cartridges. MAINTENANCE TANK Displays the status of the maintenance tank. JOB HISTORY Displays the approximate amount of ink and paper used
  • Epson Stylus Pro WT7900 | User's Guide - Page 130
    Selects the media type loaded in the printer. CUSTOM PAPER Lets you set up and paper type (Epson media) or thickness (non-Epson media) for Guide for details) NETWORK SETUP Select to enable or disable network printing. IP ADDRESS SETTING Select to set the IP address automatically or manually
  • Epson Stylus Pro WT7900 | User's Guide - Page 131
    , 66 to 67 Cutter cutting paper manually, 56 ordering replacement, 10 replacing, 94 to 96 D Date and time setting, 92 Default settings, restoring, 92 to 93 Depth of printer, 122 Diagnosing problems, 105 Dimensions of printer, 122 Documentation, how to use, 9 E EDM status, checking, 82 Electrical
  • Epson Stylus Pro WT7900 | User's Guide - Page 132
    of printer, 122 Help, Epson, 11 Humidity requirements, 121 I Ink icons, 127 light, 16, 106 Ink cartridges checking status, 81 to 82, 88 to 89 installing, 37 to 40 ordering, 89 replacing, 88 to 91 safety instructions, 14 specifications, 123 Ink, monitoring level, 82 132 Installing software, 41
  • Epson Stylus Pro WT7900 | User's Guide - Page 133
    setting, 56 Paper configuration settings, 73 to 75 custom settings, 113 cutting manually, 56 handling, 45 to 75 icons, 127 jams, 117 to 118 light, 106 non-Epson, 73 to 75 printable area, 123 problems, 116 to 118 removing from printer, 57 to 59 roll, see Roll paper sizes, 122 specifications, 122 to
  • Epson Stylus Pro WT7900 | User's Guide - Page 134
    , 11 T Technical support, 11 Temperature requirements, 121 Test Print menu, 82 Time and date setting, 92 Total prints, checking, 82 Transporting printer, 100 to 103 Trim lines, printing control panel, 56 Troubleshooting, 105 to 119 U UltraChrome HDR ink cartridges, 89 Uninstalling software, 119 Unit
  • Epson Stylus Pro WT7900 | User's Guide - Page 135
    to 98 Weight of printer, 122 White ink cleaning nozzles, 83 maintenance, 78 to 81 refreshing, 86, 104 replacing with cleaning liquid, 83, 129 shaking, 78 to 81 status in print head, 16 troubleshooting, 112 uneven print density, 112 Width of printer, 122 Windows installing software, 41 to 42 system
  • Epson Stylus Pro WT7900 | User's Guide - Page 136
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
Epson Stylus
®
Pro WT7900
USER’S GUIDE