Epson Stylus Pro WT7900 User's Guide - Page 102
Moving the Printer on the Stand, then unplug the printer.
View all Epson Stylus Pro WT7900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
102 | Maintaining and Transporting the Printer WARNING: The printer is very heavy. Make sure you have four people lift it. 6. Remove the two wing nuts and lock washers securing the printer to the stand (underneath the printer). Keep them in a safe place. 7. Lift the printer using the handgrips, two in front and two in back. Caution: Do not roll the printer on angled or uneven surfaces. 8. Keep the printer level while moving it. See page 103 for information about setting up the printer after transporting it. To ship the printer a longer distance, you should repack it using the original box and packing materials. If you don't have the original packaging, you can purchase replacement packaging from Epson. See page 10 for more information. Moving the Printer on the Stand When you need to move the printer a short distance, such as within the same building, you can roll the printer on its casters. 1. Press the P power button to turn off the printer. Wait until the lights on the control panel stop flashing and go out, and then unplug the printer. 2. Disconnect the power cord and interface cable. 3. Remove any paper and close the roll paper cover. Make sure the front cover is closed. 4. Remove the film basket as described on page 64. 5. Store the paper basket as described on page 72. 102