Epson Stylus Pro WT7900 User's Guide - Page 96
Installing the New Cutter, Firmly tighten the screw using a Phillips-head screwdriver.
View all Epson Stylus Pro WT7900 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
96 | Maintaining and Transporting the Printer Installing the New Cutter Remove the new blade from its package, then follow these steps to install it: 1. Attach the new cutter to the holder. Align the white pin with the white hole as shown. 2. Firmly tighten the screw using a Phillips-head screwdriver. Note: Reinstall the optional SpectroProofer if necessary, following the instructions that came with it. 3. Insert the cover, then press it closed. 96
96
96
|
Maintaining and Transporting the Printer
Installing the New Cutter
Remove the new blade from its package, then follow these steps to install it:
1.
Attach the new cutter to the holder. Align the white pin with the white
hole as shown.
2.
Firmly tighten the screw using a Phillips-head screwdriver.
3.
Insert the cover, then press it closed.
Note:
Reinstall the
optional SpectroProofer if
necessary, following the
instructions that came
with it.