Fluke 744 Fluke 744 Users Manual - Page 37
want to enter a number., Repeat step 6 until you are satisfied with the ID
View all Fluke 744 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
4. Press eor the Choices softkey. The display appears as follows: Documenting Process Calibrator Setting Up the Calibrator 8. Press the Done softkey. 9. Press the Done softkey or s to exit Setup mode. gj40s.eps 5. The ID string is shown at the bottom of the boxed area. To erase a character, press the Back Space softkey. To erase the whole string, press c. 6. Press u, d, L, or R to select a character, then press e. Use the numeric keypad if you want to enter a number. 7. Repeat step 6 until you are satisfied with the ID string appearing in the window. 27
Documenting Process Calibrator
Setting Up the Calibrator
27
4.
Press
e
or the
Choices
softkey. The
display appears as follows:
gj40s.eps
5.
The
ID
string is shown at the bottom of the boxed
area. To erase a character, press the
Back
Space
softkey. To erase the whole string, press
c
.
6.
Press
u
,
d
,
L
, or
R
to select a character, then
press
e
. Use the numeric keypad if you
want to enter a number.
7.
Repeat step 6 until you are satisfied with the ID
string appearing in the window.
8.
Press the
Done
softkey.
9.
Press the
Done
softkey or
s
to exit Setup
mode.