Fluke 744 Fluke 744 Users Manual - Page 79
for MEASURE/SOURCE mode. The, Enter values
View all Fluke 744 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 79 highlights
8. Press M for MEASURE/SOURCE mode. The display changes to: Documenting Process Calibrator Calibrating a Process Instrument gj42s.eps 9. Press the As Found softkey, followed by the Instrument softkey. The display changes to: gj44s.eps 10. Enter values for 0% and 100% of 4.0 mA and 20.0 mA, respectively. Set Tolerance to 0.5% of span. (Use other values if necessary for your application.) 69
Documenting Process Calibrator
Calibrating a Process Instrument
69
8.
Press
M
for MEASURE/SOURCE mode. The
display changes to:
gj42s.eps
9.
Press the
As Found
softkey, followed by the
Instrument
softkey. The display changes to:
gj44s.eps
10. Enter values for
0%
and
100%
of 4.0 mA and
20.0 mA, respectively. Set
Tolerance
to 0.5% of
span. (Use other values if necessary for your
application.)