Fluke 744 Fluke 744 Users Manual - Page 52
Square-Law Process Variables, softkey and select another scale
View all Fluke 744 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
744 Users Manual Square-Law Process Variables When you select √ within scaling, the calibrator takes the square root of its input and displays the measurement in percent. For example, when connected to the output of a delta-pressure transmitter, the calibrator reading is proportional to flow rate. 1. If necessary, press M for MEASURE mode. 2. Select a measurement function (m,v, h,q, t, or p) as previously described. 3. Press the Scale softkey. 4. Select √ scale from the list. 5. Use the numeric keypad to enter the 0% of scale value (0% Value). 6. Press e. 7. Use the numeric keypad to enter the 100% of scale value (100% Value). 8. Press e. 42 9. Set Mode to √. 10. Press e. 11. Press the Done softkey. Square root percent of scale remains in effect until you change to another measurement function or press the Scale softkey and select another scale mode.