Fluke 744 Fluke 744 Users Manual - Page 73

Start Value, End Value, Ramp Time., Trip Detect, Enabled, Voltage, Continuity, SOURCE, Ramp Up/Down

Get Fluke 744 PDF manuals and user guides View all Fluke 744 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 73 highlights

7. Press the Ramp softkey. The display changes to the following: Documenting Process Calibrator Using Source Mode 10. Press the Done softkey. Note the RAMP annunciator next to SOURCE at the top of the display. 11. Select a low-to-high ramp or a high-to-low ramp with the Ramp Up/Down softkey. 12. To start ramping, press the Start Ramp softkey. 13. Ramping continues until a trip is detected (if enabled), the ramp time expires, or you press the Stop Ramp softkey. gj41s.eps 8. Fill in the parameters as prompted. Enter the Start Value, End Value, and Ramp Time. 9. To automatically stop ramping if a trip condition is detected, set the Trip Detect to Enabled, and select Voltage or Continuity as the trip function. 63

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
Documenting Process Calibrator
Using Source Mode
63
7.
Press the
Ramp
softkey. The display changes to
the following:
gj41s.eps
8.
Fill in the parameters as prompted. Enter the
Start Value, End Value
, and
Ramp Time.
9.
To automatically stop ramping if a trip condition
is detected, set the
Trip Detect
to
Enabled
, and
select
Voltage
or
Continuity
as the trip function.
10. Press the
Done
softkey. Note the
RAMP
annunciator next to
SOURCE
at the top of the
display.
11. Select a low-to-high ramp or a high-to-low ramp
with the
Ramp Up/Down
softkey.
12. To start ramping, press the
Start Ramp
softkey.
13. Ramping continues until a trip is detected (if
enabled), the ramp time expires, or you press
the
Stop Ramp
softkey.