HP LaserJet Enterprise 600 HP LaserJet Enterprise 600 M601, M602, and M603 Ser - Page 80

Paper size The width and height values can be changed by typing numeric strings into the edit boxes in the Paper Size group box. Any entry that is greater than the maximum limits of the width and height control is rounded down to the maximum valid entry, while any entry that is smaller than the minimum limits of the width and height control is rounded up to the minimum valid entry. If units are in millimeters, the custom paper-size range minimum is the limit rounded up to the nearest whole millimeter. The custom paper-size range maximum is the limit rounded down to the nearest whole millimeter. Any non-numerical entry reverts to the minimum value. Width and height entries are validated when the focus has changed. The resolution of each control is 1 millimeter or 1/10 of an inch, depending on the current measurement units. Supported paper sizes This product supports a number of paper sizes, and it adapts to various media. NOTE: To obtain best results, select the correct paper size and type in the print driver before printing. Table 3-1 Supported paper and print media sizes Size and dimensions Tray 1 Tray 2 and the optional 500sheet trays Optional 1,500-sheet tray Optional envelope feeder Letter 216 x 279 mm (8.5 x 11 in) A4 210 x 297 mm (8.27 x 11.69 in) Legal 216 x 356 mm (8.5 x 14 in) Executive 184 x 267 mm (7.24 x 10.51 in) A5 148 x 210 mm (5.83 x 8.27 in) Optional duplexer Optional stacker and stapler/ stacker Optional 5-bin mailbox (Stacker only) (Stacker only) 64 Chapter 3 HP PCL 6 print driver for Windows ENWW