HP StorageWorks 2/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 128

11 EM-1036 EM-1036 Message , [EM-1036], ,, WARNING, , is not accessible. Probable Cause Indicates that the specified field-replaceable unit (FRU) does not seem to be present on the switch. If the FRU is a world-wide name (WWN) card, then default WWN and IP addresses are used for the switch. Recommended Action Reseat the FRU card. If the message persists, reboot or power cycle the switch. Run the systemVerification command to verify that the switch does not have hardware problems. Refer to the Fabric OS Command Reference for more information on this command. If the message persists, replace the FRU. Severity WARNING EM-1037 Message , [EM-1037], ,, INFO, , is no longer faulted. Probable Cause Indicates that the specified Power Supply has been marked as no longer being faulty. Probably because its AC power supply has been turned on. Recommended No action is required. Action Severity INFO EM-1041 Message , [EM-1041], ,, WARNING, , Sensor values for : . Probable Cause Indicates that sensors detected a warning condition. All significant sensors for the field-replaceable unit (FRU) are displayed; each contains a header. This message can display: • voltages in volts • temperature in Celsius • fan speeds in RPM Recommended If the message is isolated, monitor the error messages on the switch. If the message is associated Action with other messages, follow the recommended action for those messages. Severity WARNING 80 Fabric OS Message Reference 53-1000437-01