HP StorageWorks 2/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 273

27 FW-1379 Probable Cause Indicates that the number of illegal commands has risen above the high boundary. This counter tracks how many times commands allowed only on the primary fabric configuration server (FCS) switch have been executed on a non-primary FCS switch. There are many commands that can be executed only on the primary FCS switch as well as one security command that can be executed only on a backup FCS switch. The counter increments every time someone issues one of these commands on a switch where it is not allowed. Recommended Responses to security-class messages depend on user policies. Consult your security administrator Action for response strategies and policies. Severity WARNING FW-1379 Message , [FW-1379], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of illegal commands has changed from a value outside of the acceptable range to a value within the acceptable range. This counter tracks how many times commands allowed only on the primary fabric configuration server (FCS) switch have been executed on a non-primary FCS switch. There are many commands that can be executed only on the primary FCS switch as well as one security command that can be executed only on a backup FCS switch. The counter increments every time someone issues one of these commands on a switch where it is not allowed. Recommended No action is required. Action Severity INFO FW-1400 Message , [FW-1400], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the flash usage percentage has changed. Flash increases and decreases slightly with normal operation of the switch. Excessive permanent increases can lead to future problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1401 Message , [FW-1401], ,, INFO, , , is below low boundary(High=, Low=). Current value is . Fabric OS Message Reference 225 53-1000437-01