HP StorageWorks 2/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 361

Chapter PLAT System Messages 53 PLAT-1000 Message , [PLAT-1000], , FFDC, CRITICAL, , Probable Cause Indicates that nonrecoverable PCI errors have been detected. Recommended Action The system will be faulted and might automatically reboot. If the system does not reboot, then try issuing the reboot command from a command-line prompt. Run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity CRITICAL PLAT-1001 Message , [PLAT-1001], ,, INFO, , Resetting standby CP (double reset may occur) Probable Cause Indicates that the standby CP is being reset. This message is typically generated by a CP that is in the process of becoming the active CP. Note that in certain circumstances a CP may experience a double reset and reboot twice in a row. A CP can recover automatically even if it has rebooted twice. Recommended No action is required. Action Severity INFO Fabric OS Message Reference 313 53-1000437-01