HP StorageWorks 2/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 198

25 FSS-1003 FSS-1003 Message , [FSS-1003], ,, WARNING, , Component () misused the update transaction () without marking the transaction beginning. Probable Cause Indicates that the Fabric OS state synchronization (FSS) service has dropped the update because an application has not set the transaction flag correctly. Recommended Action Run the haSyncStart command if this is a dual-CP system, or reboot the switch if it is a nonbladed system. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity WARNING FSS-1004 Message , [FSS-1004], ,, ERROR, , Memory shortage Probable Cause Indicates that the system ran out of memory. Recommended Action Run the memShow command to view memory usage. Run the haSyncStart command if this is a dual-CP system, or reboot the switch if it is a nonbladed system. If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the supportSave command and contact your switch service provider. Severity ERROR FSS-1005 Message , [FSS-1005], ,, WARNING, , FSS read failure Probable Cause Indicates that the read system call to the Fabric OS state synchronization (FSS) device failed. Recommended If the message persists, run supportFtp (as needed) to set up automatic FTP transfers; then run the Action supportSave command and contact your switch service provider. Severity WARNING 150 Fabric OS Message Reference 53-1000437-01