HP StorageWorks 2/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 439

63 SEC-1321 SEC-1321 Message , [SEC-1321], ,, ERROR, , Failed secure mode enable command. Reason: . Probable Cause Indicates that the security enable failed on the fabric because switch has conflicting configuration such as fabric wide consistency configuration or AD configuration. Recommended Action Verify that the security event was planned. If the security event was planned, run the fddcfg --fabwideset "" command or ad --clear command to clear the fabric wide consistency configuration or AD configuration and retry the secModeEnable command. Severity ERROR SEC-1322 Message , [SEC-1322], ,, WARNING, , Some DCC policy is too large, distribution cancelled Probable Cause Indicates that this fabric is not able to support a device connection control (DCC) policy with more than 256 ports. Recommended Reconfigure any policy that includes more than 256 ports in its member list, then save the policy Action configuration changes. Severity WARNING SEC-1323 Message , [SEC-1323], ,, INFO, , Key(s) \"\" ignored during configdownload. Probable Cause Indicates that the specified key is ignored during configDownload. Recommended Verify that the event was planned. If the event was planned, no action is required. If the event was Action not planned, take appropriate action as defined by your enterprise security policy. Severity INFO Fabric OS Message Reference 391 53-1000437-01