HP StorageWorks 2/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 392

63 SEC-1043 SEC-1043 Message , [SEC-1043], ,, ERROR, , Invalid port range - . Probable Cause Indicates that the specified port is not within the minimum and maximum range. Recommended Use valid syntax when entering port ranges. Action Severity ERROR SEC-1044 Message , [SEC-1044], ,, ERROR, , Duplicate member in (). Probable Cause Indicates that the specified member is a duplicate in the input list. The list can be a policy list or a switch member list. Recommended Do not specify any duplicates. Action Severity ERROR SEC-1045 Message , [SEC-1045], ,, ERROR, , Too many port members. Probable Cause Indicates that there has been a corruption during the distribution of the security database. This can only occur when the primary fabric configurations server (FCS) is distributing the security database to the other switches in the fabric and local validation finds that there is an error in the security database. This is a rare occurrence. Recommended Action Run the secFabricShow command to verify that the fabric is still consistent. All the switches should be in the ready state. If a switch is in the error state, the database might not be correctly updated for that specific switch. Severity ERROR 344 Fabric OS Message Reference 53-1000437-01