HP StorageWorks 2/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 224
FW-1140, FW-1160, FW-1161
View all HP StorageWorks 2/32 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 224 highlights
27 FW-1140 FW-1140 Message , [FW-1140], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the number of small form-factor pluggable (SFP) state changes has changed from a value outside of the acceptable range to a value within the acceptable range. SFP state changes occur when the SFP is inserted or removed. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1160 Message , [FW-1160], ,, INFO, , , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the number of link failures that the port experiences has changed. Link loss errors occur when a link experiences a loss of signal and fails. Both physical and hardware problems can cause link loss errors. Link loss errors frequently occur due to a loss of synchronization. Check for concurrent loss of synchronization errors and, if applicable, troubleshoot them. Recommended Action Check both ends of your cable connection. Verify that the cable and small form-factor pluggables (SFPs) are not faulty. Losses of synchronization commonly causes link failures. If you receive concurrent loss of synchronization errors, troubleshoot the loss of synchronization. Severity INFO FW-1161 Message , [FW-1161], ,, INFO, , , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the number of link failures that the port experiences has fallen below the low boundary. Link loss errors occur when a link experiences a loss of signal and fails. Both physical and hardware problems can cause link loss errors. Link loss errors frequently occur due to a loss of synchronization. Check for concurrent loss of synchronization errors and, if applicable, troubleshoot them. A low number of link loss errors means that the switch is functioning normally. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO 176 Fabric OS Message Reference 53-1000437-01