HP StorageWorks 2/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 212

27 FW-1047 FW-1047 Message , [FW-1047], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has risen above the high boundary. The supplied current of the SFP transceiver is outside of the normal range, indicating possible hardware failure. Recommended If the current rises above the high boundary, you must replace the SFP. Action Severity WARNING FW-1048 Message , [FW-1048], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has changed from a value outside of the acceptable range to a value within the acceptable range. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1049 Message , [FW-1049], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the value of the small form-factor pluggable (SFP) voltage has changed. Frequent voltage fluctuations are an indication that the SFP is deteriorating. Recommended Replace the SFP if you see frequent voltage fluctuations. Action Severity INFO 164 Fabric OS Message Reference 53-1000437-01