HP StorageWorks 2/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 400

63 SEC-1077 SEC-1077 Message , [SEC-1077], ,, ERROR, , Failed to activate new policy set on all switches. Probable Cause Indicates that the policy could not be activated. Possible reasons that the policy could not be activate include not enough memory or a busy switch. Recommended Run the secFabricShow command to verify that all switches in the fabric are in the ready state. Action Retry the command when all switches are ready. Severity ERROR SEC-1078 Message , [SEC-1078], ,, ERROR, , No new data to abort. Probable Cause Indicates that there are no new changes in the defined security policy database that can be aborted. Recommended Verify that security event was planned. Verify if there were really any changes to the defined policy Action database that can be aborted. Severity ERROR SEC-1079 Message , [SEC-1079], ,, ERROR, , The policy name is invalid. Probable Cause Indicates that the policy name entered in the secPolicyCreate|Activate|Add|Delete command was invalid. Recommended Run the command again using a valid policy name. Action Severity ERROR 352 Fabric OS Message Reference 53-1000437-01