HP StorageWorks 2/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 204

27 FW-1003 FW-1003 Message , [FW-1003], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the internal temperature of the switch has risen above the high boundary to a value that might damage the switch. Recommended This message generally appears when a fan fails. If so, a fan-failure message accompanies this Action message. Replace the fan field-replaceable unit (FRU). Severity WARNING FW-1004 Message , [FW-1004], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the internal temperature of the switch has changed from a value outside of the acceptable range to a value within the acceptable range. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. If you receive a temperature-related message, check for an accompanying fan-related message and check fan performance. If all fans are functioning normally, check the climate control in your lab. Severity INFO FW-1005 Message , [FW-1005], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the speed of the fan has changed. Fan problems typically contribute to temperature problems. Recommended Action No action is required. Respond to this message as is appropriate to the particular policy of the end-user installation. Consistently abnormal fan speeds generally indicate that the fan is malfunctioning. Severity INFO 156 Fabric OS Message Reference 53-1000437-01