HP StorageWorks 2/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 274

27 FW-1402 Probable Cause Indicates that the flash usage percentage has fallen below the low boundary. Flash increases and decreases slightly with normal operation of the switch. Excessive permanent increases can lead to future problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1402 Message , [FW-1402], ,, WARNING, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the flash usage percentage has risen above the high boundary. Flash increases and decreases slightly with normal operation of the switch. Excessive permanent increases can lead to future problems. Recommended You might have to remove some unwanted files to create some flash space. Run the supportSave Action command to remove files from the kernel space. Severity WARNING FW-1403 Message , [FW-1403], ,, INFO, , , is between high and low boundaries(High=, Low=). Current value is . Probable Cause Indicates that the flash usage percentage has changed from a value outside of the acceptable range to a value within the acceptable range. Flash increases and decreases slightly with normal operation of the switch. Excessive permanent increases can lead to future problems. Recommended No action is required. Respond to this message as is appropriate to the particular policy of the Action end-user installation. Severity INFO FW-1424 Message , [FW-1424], ,, WARNING, , Switch status changed from to . Probable Cause Indicates that the switch status is not in a healthy state. This occurred because of a policy violation. Recommended Run the switchStatusShow command to determine the policy violation. Action Severity WARNING 226 Fabric OS Message Reference 53-1000437-01