HP StorageWorks 2/32 Brocade Fabric OS Message Reference - Supporting Fabric O - Page 206

27 FW-1009 FW-1009 Message , [FW-1009], ,, INFO, , , value has changed(High=, Low=). Current value is . Probable Cause Indicates that the state of the power supply has changed from faulty to functional, or from functional to faulty. Recommended Action If the power supply is functioning correctly, no action is required. If the power supply is functioning below the acceptable boundary, verify that it is seated correctly in the chassis. Run the psShow command to view the status of the power supply. If the power supply continues to be a problem, replace the faulty power supply. Severity INFO FW-1010 Message , [FW-1010], ,, WARNING, , , is below low boundary(High=, Low=). Current value is . Probable Cause Indicates that the power supply is faulty. The power supply is not producing enough power. Recommended Verify that you have installed the power supply correctly and that it is correctly seated in the Action chassis. If the problem persists, replace the faulty power supply. Severity WARNING FW-1011 Message , [FW-1011], ,, INFO, , , is above high boundary(High=, Low=). Current value is . Probable Cause Indicates that the power supply is functioning properly. Recommended Set the high boundary above the normal operation range. Action Severity INFO 158 Fabric OS Message Reference 53-1000437-01